AZ21501-1A-15D

AZ21501 40 AMP MINIATURE POWER RELAY FEATURES • • • • • • 1 Form A, B and C contacts available AC and DC coils available Class F high temperature available Epoxy sealed versions available UL, CUR file E44211 TÜV Pending CONTACTS Arrangement Ratings SPST (1 Form A, or B) SPDT (1 Form C) Resistive load: Max. switched power: 1100 W or 7200 VA Max. switched current: 40 A (Form A) Max. switched voltage: 300 VAC, 110 VDC GENERAL DATA Life Expectancy Mechanical Electrical Operate Time Release Time Dielectric Strength Minimum operations 1 x 107 1 x 105 at 30 A 120 VAC Res. 15 msec max. at nominal coil voltage 10 msec max. at nominal coil voltage (without suppression) 1500 Vrms contact to contact 2500 Vrms contact to coil 4000 Vrms contact to coil “T” version 1000 megohms min. at 20°C, 500 VDC 50% RH DC: > 10% of nominal coil voltage AC: > 30% of nominal coil voltage -55°C (-67°F) to 100°C (212°F) Class B -55°C (-67°F) to 130°C (266°F) Class B -55°C (-67°F) to 125°C (257°F) Class F -55°C (-67°F) to 155°C (311°F) Class F UL, CUR NO:40 A at 240 VAC, 30 A General Purpose 2 HP at 250 Vac, 277 VAC NC: 30A at 240 Vac, 30A at 30 VDC 20A General Purpose 1 1/2 HP at 250 Vac, 277 VAC (at sea level for 1 min.) Insulation Resistance Dropout Ambient Temperature Operating Storage TUV NO: 40A at 240 VAC, 14 VDC NC: 30A at 240 VAC, 14 VDC Material Resistance Silver cadmium oxide [1], silver tin oxide [2 Vibration < 50 milliohms initially (24 V, 1 A voltage drop method) Shock Enclosure Terminals Max. Solder Temp. 0.062" DA at 10–55 Hz 10 g P.B.T. polyester Tinned copper alloy, P.C., 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 30 grams COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Max. Temperature DC: 500 mW AC: 1.4 VA DC: 1.7 W at 20°C AC: 2.7 VA at 20°C Max. 130°C (266°F) Class B Max. 155°C (311°F) Class F Max. Solder Time Max. Solvent Temp. Max. Immersion Time Weight NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 3/10/09 AZ21501 RELAY ORDERING DATA COIL SPECIFICATIONS – DC Coil Nominal Coil VDC 3 5 6 9 12 15 18 24 48 110 Nominal Coil VAC 12 24 120 220 Must Operate VDC 2.25 3.75 4.50 6.75 9.00 10.25 13.5 18.0 36.0 82.50 Must Operate VAC 9 18 90 165 Max. Continuous VDC 3.9 6.5 7.8 11.7 15.6 19.5 23.4 31.2 62.4 143 Max. Continuous VAC 15.6 31.2 156 286 Nominal Current mA ± 10% 300 179 150 100 75 60 50 38 19 8 Nominal Coil Power VA 2.0 2.0 2.0 2.0 Coil Resistance ± 10% 10 28 40 90 160 250 360 640 2,560 13,445 Coil Resistance ± 10% 27 120 3,040 13,490 ORDER NUMBER* AZ21501–1A–3D AZ21501–1A–5D AZ21501–1A–6D AZ21501–1A–9D AZ21501–1A–12D AZ21501–1A–15D AZ21501–1A–18D AZ21501–1A–24D AZ21501-1A–48D AZ21501–1A–110D COIL SPECIFICATIONS – AC Coil 50/60 Hz ORDER NUMBER* AZ21501–1A–12A AZ21501–1A–24A AZ21501–1A–120A AZ21501–1A–240A *Substitute “-1B” or “-1C” in place of “-1A” for 1 Form B or 1 Form C respectively. For silver tin oxide contacts substitute “-1AE” or “-1CE” in place of “-1A” or “1C.” To indicate class F version, add suffix “F”. Substitute “DE” or “AE” in place of “D” or “A” for epoxy sealed version. Use AZ21511 for Pin 6 style. MECHANICAL DATA Outline Dimensions 0.130 0.0 20 (0.146) 0.787ma x. PC Board Layout AZ21511 0.020 20max . 0.701 0.55 0. 0.043 0.043 0.031 0.059 0.027 0.027 0.1 0.047 0.047 FORM 1A,1B,1C 0.606 0.492 2.4 0.094 0.209 27.6max. 1.087max. 25.5 1.004 Wiring Diagram 0.787 BOTTOM VIEW FORM 1A 3 6 4 FORM 1B 3 6 5 FORM 1C 3 6 4 5 0.724 1.279max. 2 1 2 1 2 1 Omit pin 6 for AZ21501 Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 3/10/09