AZ2300-1C-24D

AZ2300 20 AMP MINIATURE POWER RELAY FEATURES • • • • • • Low cost 20 Amp switching 55 Amp inrush current Class B insulation system Quick-connect terminals UL, CUR file E44211 CONTACTS Arrangement Ratings SPST (1 Form A) SPDT (1 Form C) Resistive load: Max. switched power: 450 W or 3300 VA Max. switched current: 20 A Max. switched voltage: 150* VDC or 400 VAC * If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 1 x 107 1 x 105 at 15 A 220 VAC Res. 15 ms at nominal coil voltage 10 ms at nominal coil voltage (with no coil suppression) UL, CUR Material Resistance NO: 15 A at 220 VAC (100 k operations) NC: 10 A at 220 VAC (100 k operations) Silver cadmium oxide < 50 milliohms initially (24 V, 1 A voltage drop method) Dielectric Strength 3000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock 1000 megohms min. at 500 VDC, 20°C 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 130°C (266°F) 0.062" DA at 10–55 Hz COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 441 mW 1.65 W at 20°C (68°F) ambient 1.35 W at 40°C (104°F) ambient 60°C (108°F) at nominal coil voltage Max. 130°C (266°F) Class B Operating 20 g, 11 ms 1/2 sine (no false operation) Non-operating 100 g, 11 ms 1/2 sine (no damage) Enclosure Terminals P.B.T. polyester Tinned copper alloy Quick-connect Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. Max. Solder Temp. 270°C (518°F) 5 seconds 40 grams NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. Max. Solder Time Weight 5/25/05W AZ2300 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 6 12 24 48 Must Operate VDC 4.2 8.4 16.8 33.6 Max. Continuous VDC 8.0 16.2 32.0 64.0 Coil Resistance ±10% 40 160 640 2,560 ORDER NUMBER Form A AZ2300–1A–6D AZ2300–1A–12D AZ2300–1A–24D AZ2300–1A–48D Form C AZ2300–1C–6D AZ2300–1C–12D AZ2300–1C–24D AZ2300–1C–48D MECHANICAL DATA 0.177 (4.5) 0.020 (.5) 2 pl 3 Com 2 4 NO 5 NC 1 1.26 max. (32 max.) 1.52 (38.5) 1.89 max. (48 max.) WIRING DIAGRAM (Top View) (SPDT shown) ø0.176 ø(4.5) 2 pl 1.52 (38.5) 0.748 max. (19 max.) 0.079 (2.0) 0.187 (4.75) 2 pl 0.240 (6.0) 2 pl 0.032 (0.8) 3 pl 0.250 (6.35) 3 pl 0.315 (8.0) 3 pl 0.185 (4.7) 3 pl ø0.065 ø(1.65) 3 pl 0.082 (2.1) 2 pl Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 0.079 (2.0) 1.22 max. (31 max.) 0.100 (2.5) 3 pl 5/25/05W