AZ2310-1A-60D

AZ2310 30 AMP MINIATURE POWER RELAY FEATURES • • • • • • Low cost 30 Amp switching 144 Amp inrush current Quick connect terminals Creepage distance more than 8 mm UL, CUR file E44211 CONTACTS Arrangement Ratings SPST N.O. (1 Form A) Resistive load: Max. switched power: 7500 VA Max. switched current: 30 A Max. switched voltage: 250 VAC Rated Load UL, CUR 30 A at 250 VAC Res. 2 HP 125/250 VAC TV-15 at 120 VAC Material Resistance Silver tin oxide < 30 milliohms initially (24 V, 1 A voltage drop method) Dielectric Strength (at sea level for 1min) Insulation Resistance Dropout GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 1 x 107 1 x 105 at 30 A 240 VAC Res. 20 ms at nominal coil voltage 5 ms at nominal coil voltage (with no coil suppression) 4000 Vrms coil to contact 1200 Vrms between open contacts 1000 megohms min. at 20°C, 500 VDC, 50% RH Greater than 10% of nominal coil volt age At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) 0.04" DA at 10–55 Hz COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 588 mW 2.0 W at 20°C (68°F) ambient 30°C (54°F) at nominal coil voltage Max. 105°C (221°F) Ambient Temperature Operating Storage Vibration Shock Operating 10 g, 11 ms, 1/2 sine (no false operation) Non-Operating 100 g, 11 ms, 1/2 sine (no damage) Enclosure Terminals P.B.T. polyester Tinned copper alloy P. C. & quick connect Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. Weight 55 grams 11/30/05W AZ2310 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 3 5 6 9 12 24 48 60 Must Operate VDC 2.1 3.5 4.2 6.3 8.4 16.8 33.6 42.2 Max. Continuous VDC 3.9 6.3 7.7 11.6 15.5 31.0 62.0 77.5 Coil Resistance ± 10% 7.5 20 30 67 120 480 1920 3000 ORDER NUMBER Form A (SPST N.O.) AZ2310–1A–3D AZ2310–1A–5D AZ2310–1A–6D AZ2310–1A–9D AZ2310–1A–12D AZ2310–1A–24D AZ2310–1A–48D AZ2310–1A–60D MECHANICAL DATA MOUNTING HOLE LAYOUT NO .177 [4.5] .866 [22.0] 1.291 [32.8] COM 2 x ø.177 [ø4.5] 1.713 [43.5] 1.988 [50.5] 1.713 [43.5] 1.409 [35.8] 4 x .032 [0.8] 2 x .187 [4.7] 2 x .250 [6.3] WIRING DIAGRAM 2 x .295 [7.5] .965 [24.5] .098 [2.5] NO Viewed toward terminals 2 x .354 [9.0] Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" COM 11/30/05W