AZ2700-1A-240A

AZ2700 30 AMP POWER RELAY FEATURES • • • • • • Low cost 30 Amp switching Class B insulation system standard, Class F available Quick connect terminals 4 kV dielectric Standard (2.4 mm) and wide contact gap (3.0 mm) available • UL, CUR file E44211 • TÜV R50031999 CONTACTS Arrangement Ratings SPST (1 Form X) DPST (2 Form X) Resistive load: Max. switched power: 840 W or 8310 VA Max. switched current: 30 A Max. switched voltage: 150* VDC or 400 VAC *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (max) Release Time (max) Minimum operations 1 x 106 1 x 105 at 30 A 120 VAC Res. 30 ms at nominal coil voltage 30 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 4000 Vrms coil to contact (at sea level for 1 min.) 2000 Vrms between open contacts Insulation Resistance Dropout Ambient Temperature Operating Storage 1000 megohms min. at 20°C, 500 VDC, 50% RH Greater than 5% of nominal coil voltage (DC) Greater than 15% of nominal coil voltage (AC) At nominal coil voltage -40°C (-40°F) to 85°C (185°F) - Class B -40°C (-40°F) to 105°C (221°F) - Class F -40°C (-40°F) to 130°C (266°F) - Class B -40°C (-40°F) to 155°C (311°F) - Class F 0.062" DA at 10–55 Hz Rated Load UL, CUR 30 A at 277 VAC res. 30k cycles [1] 1.5 HP at 120 VAC [1] 3 HP at 240 VAC [1] TV-10 at 120 VAC [1] 30 A at 277 VAC res. 70k cycles [2] 3 HP at 240 VAC 100k cycles [2] 10 A at 120 VAC tungsten load, 10k cycles [2] 27 A at 240 VAC, cos phi = .8, 100k cycles [1] [1] silver cadmium oxide, [2] silver tin oxide TÜV Material Resistance Silver cadmium oxide, silver tin oxide < 100 milliohms initially (24 V, 1 A voltage drop method) Vibration Shock Operating 10 g, 11 ms, 1/2 sine (no false operation) Non-Operating 100 g, 11 ms, 1/2 sine (no damage) Enclosure P.B.T. polyester Tinned copper alloy, Quick connect tabs Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 1.2 VA (AC) 3.8 W at 20°C (68°F) ambient 50°C (90°F) at nominal coil voltage Max. 130°C (266°F) - Class B Max. 155°C (311°F) - Class F Terminals Weight 120 grams NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 04/13/05W AZ2700 RELAY ORDERING DATA COIL SPECIFICATIONS – DC COIL Nominal Coil VDC 3 6 12 24 48 100 110 200 Must Operate VDC 2.25 4.50 9.00 18.00 36.0 75.0 82.5 150.0 Max. Continuous VDC 4.2 8.4 16.8 33.7 67.5 140.5 154.7 282.4 Coil Resistance ± 10% 4.7 18.8 75 300 1200 5200 6300 21000 ORDER NUMBER* 1 Form X AZ2700–1A–3D AZ2700–1A–6D AZ2700–1A–12D AZ2700–1A–24D AZ2700–1A–48D AZ2700–1A–100D AZ2700–1A–110D AZ2700–1A–200D 2 Form X AZ2700–2A–3D AZ2700–2A–6D AZ2700–2A–12D AZ2700–2A–24D AZ2700–2A–48D AZ2700–2A–100D AZ2700–2A–110D AZ2700–2A–200D COIL SPECIFICATIONS – AC COIL ORDER NUMBER* 2 Form X AZ2700–2A–6A AZ2700–2A–12A AZ2700–2A–24A AZ2700–2A–48A AZ2700–2A–120A AZ2700–2A–220A AZ2700–2A–240A Class F add suffix “F”. Nominal Coil Must Operate Max. Continuous Coil Current 1 Form X VAC VAC VAC mA ± 10% 6 4.80 6.6 319 AZ2700–1A–6A 12 9.60 13.2 160 AZ2700–1A–12A 24 19.2 26.4 80 AZ2700–1A–24A 48 38.4 52.8 40 AZ2700–1A–48A 120 96.0 132.0 23 AZ2700–1A–120A 220 176.0 242.0 10 AZ2700–1A–220A 240 192.0 264.0 9.2 AZ2700–1A–240A *For silver tin oxide add suffix “T” (UL approved for 1 Form X version only). For wide contact gap add “W”. For MECHANICAL DATA MOUNTING HOLE LAYOUT 0 1 1.320 [33.5] .177 [4.5] 2 4 1.989 [50.5] 2.362 [60.0] 6 8 2 x ø.177 [ø4.5] 2.362 [60.0] WIRING DIAGRAMS .250 x .032 [6.3 x 0.81] .433 [11.0] ø.071 [ø1.8] 0 1 1.850 [47.0] 2 4 6 2 FORM X 8 0 1 2.677 [68.0] 4 6 1 FORM X Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 04/15/05W