AZ2705-2A-6D

AZ2705 30 AMP POWER RELAY FEATURES • Low cost • 30 Amp switching • Class B insulation system standard, Class F available • Flange mount • 4 kV dielectric • Standard (2.4 mm) and wide contact gap (3.0 mm) available • UL, CUR file E44211 • TÜV R50031999 GENERAL DATA CONTACTS Arrangement Ratings SPST (1 Form X) DPST (2 Form X) Resistive load: Max. switched power: 840 W or 8310 VA Max. switched current: 30 A Max. switched voltage: 150* VDC or 400 VAC *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Life Expectancy Mechanical Electrical Operate Time (max) Release Time (max) Minimum operations 1 x 106 1 x 105 at 30 A 120 VAC Res. 30 ms at nominal coil voltage 30 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 4000 Vrms coil to contact (at sea level for 1 min.) 2000 Vrms between open contacts Insulation Resistance Dropout Ambient Temperature Operating Storage 1000 megohms min. at 20°C, 500 VDC, 50% RH Greater than 5% of nominal coil voltage (DC) Greater than 15% of nominal coil voltage (AC) At nominal coil voltage -40°C (-40°F) to 85°C (185°F) - Class B -40°C (-40°F) to 105°C (221°F) - Class F -40°C (-40°F) to 130°C (266°F) - Class B -40°C (-40°F) to 155°C (311°F) - Class F 0.062" DA at 10–55 Hz Rated Load UL, CUR 30 A at 277 VAC res. 30k cycles [1] 1.5 HP at 120 VAC [1] 3 HP at 240 VAC [1] TV-10 at 120 VAC [1] 30 A at 277 VAC res. 70k cycles [2] 3 HP at 240 VAC 100k cycles [2] 10 A at 120 VAC tungsten load, 10k cycles [2] 27 A at 240 VAC, cos phi = .8, 100k cycles [1] [1] silver cadmium oxide, [2] silver tin oxide (1 Form X only) TÜV Vibration Shock Material Resistance Silver cadmium oxide, silver tin oxide < 100 milliohms initially (24 V, 1 A voltage drop method) Operating 10 g, 11 ms, 1/2 sine (no false operation) Non-Operating 100 g, 11 ms, 1/2 sine (no damage) Enclosure Terminals P.B.T. polyester Screw mount 270°C (518°F) 5 seconds 120 grams COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 1.08 W (DC) 1.2 VA (AC) 3.8 W at 20°C (68°F) ambient 50°C (90°F) at nominal coil voltage Max. 130°C (266°F) - Class B Max. 155°C (311°F) - Class F Max. Solder Temp. Max. Solder Time Weight NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 4. Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. 12/13/03W AZ2705 RELAY ORDERING DATA COIL SPECIFICATIONS – DC COIL Nominal Coil VDC 3 6 12 24 48 100 110 200 Must Operate VDC 2.3 4.5 9.0 18.0 36.0 75.0 82.5 150.0 Max. Continuous VDC 4.2 8.4 16.8 33.7 67.5 140.5 154.7 282.4 Coil Resistance ± 10% 4.7 18.8 75 300 1200 5200 6300 21000 ORDER NUMBER* 1 Form X AZ2705–1A–3D AZ2705–1A–6D AZ2705–1A–12D AZ2705–1A–24D AZ2705–1A–48D AZ2705–1A–100D AZ2705–1A–110D AZ2705–1A–200D 2 Form X AZ2705–2A–3D AZ2705–2A–6D AZ2705–2A–12D AZ2705–2A–24D AZ2705–2A–48D AZ2705–2A–100D AZ2705–2A–110D AZ2705–2A–200D COIL SPECIFICATIONS – AC COIL Nominal Coil VAC 6 12 24 48 120 220 240 Must Operate VAC 4.8 9.6 19.2 38.4 96.0 176.0 192.0 Max. Continuous VAC 6.6 13.2 26.4 52.8 132.0 242.0 264.0 Coil Current mA ± 10% 319 160 80 40 23 10 9.2 ORDER NUMBER* 1 Form X AZ2705–1A–6A AZ2705–1A–12A AZ2705–1A–24A AZ2705–1A–48A AZ2705–1A–120A AZ2705–1A–220A AZ2705–1A–240A 2 Form X AZ2705–2A–6A AZ2705–2A–12A AZ2705–2A–24A AZ2705–2A–48A AZ2705–2A–120A AZ2705–2A–220A AZ2705–2A–240A *For silver tin oxide add suffix “T” (UL approved for 1 Form X only). For wide contact gap add “W”. For Class F add suffix “F”. MECHANICAL DATA 2xM3.5 1.33 Max [33.8] .177 [4.5] 2 4 6 8 2.02 Max [51.3] 4xM4 1.99 [50.5] 2.36 [60] 2.69 Max [68.3] .118 [3.0] Wiring Diagrams 1 Form x 2 Form x With capacitor AC operation coil 4 6 2 4 6 8 Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 12/13/03W