AZ2850-2C-120A

AZ2850 30 AMP MINIATURE POWER RELAY FEATURES • • • • • • • 30 Amp switching capability DPST-NO and DPDT configuration Meets 8 mm creepage, 4 kV dielectric Class F construction PCB terminals Epoxy sealed versions available UL, CUR file E44211, VDE 40023442 GENERAL DATA DPST-N.O. DPDT Resistive load: Max. switched power: 560 W or 8310 VA Max. switched current:30 A N.O., 3 A N.C. Max. switched voltage: 600 VAC or 30 VDC* UL, CUR N.O. 30 A at 277 VAC General Use, 100k cycles 1 Hp at 120 VAC, 100k cycles 2.5 Hp at 240 VAC, 100k cycles 110 LRA/25.3 FLA at 240 VAC (DC coils only), 30k cycles 3 A at 277 VAC General Use, 100k cycles N.O. 30A 250 VAC, N.C. 3A 250 VAC *Note: If switching voltage is greater than 30VDC, special precautions must be taken. Please contact the factory. CONTACTS Arrangement Ratings Life Expectancy Mechanical Electrical Operate Time Release Time Minimum operations 5 x 107 1 x 105 at 30 A 120 VAC Res. N.O. 15 ms typical 25 ms maximum with bounce 10 ms typical 25 ms maximum with bounce (with no coil suppression) Dielectric Strength 1500 Vrms contact to contact (at sea level for 1 min.) 4000 Vrms contact to coil 2000 Vrms between contact sets Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock 109 ohms minimum at 500 VDC DC: Greater than 10% of nominal coil voltage AC: Greater than 20% of nominal coil voltage At nominal coil voltage DC: -40°C (-40°F) to 95°C (203°F) AC: -40°C (-40°F) to 75°C (167°F) -40°C (-40°F) to 155°C (311°F) 0.062" DA at 10–55 Hz Operational, 10 g for 11 ms 1/2 sine pulse (no contact opening > 100usec) Non-destructive, 100 g for 11 ms 1/2 sine pulse P.B.T. polyester Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 86 grams UL, CUR N.C. VDE Material Resistance Silver cadmium oxide, silver tin oxide