AZ696-1C-9D

AZ696 10 AMP SUBMINIATURE POWER RELAY FEATURES • Miniature size: Form A version: 0.63" (16 mm) height, 1.10" (30 mm) length, 0.39" (10 mm) width • High sensitivity, 100 mW pickup • Dielectric strength 4000 Vrms • Isolation spacing greater than 8 mm • Approvals/Standards include: UL, VDE, IEC • 10 Amp switching capability • Epoxy sealed for automatic wave soldering and cleaning • UL, CUR file E43203 CONTACTS Arrangement Ratings SPDT (1 Form C) SPST (1 Form A) Resistive load: Max. switched power: 300 W or 2500 VA Max. switched current: 10 A Max. switched voltage: 150* VDC or 380 VAC UL Rating: 10 A at 30 VDC resistive 10 A at 250 VAC general use 1/4 HP 120 VAC 1/2 HP 250 VAC B 300 pilot duty *Note: If switching voltage is greater than 30 VDC, special GENERAL DATA SPST (1 Form B) Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 10 million 1 X 105 at 10 A 240 VAC Res. 10 ms at nominal coil voltage 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 4000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration 1000 megohms min. at 20°C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 110°C (230°F) 0.062" DA at 10–55 Hz 20 g P.B.T. polyester Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 14 grams precautions must be taken. Please contact the factory. Material Resistance Silver cadmium oxide or silver tin oxide < 30 milliohms initially (at rated current, voltage drop method) COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 100 mW 1.5 W at 20°C (68°F) ambient 1.2 W at 40°C (104°F) ambient 20°C (36°F) at nominal coil voltage Max. 110°C (230°F) Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. Weight 04/15/05W AZ696 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 5 6 9 12 18 24 48 Must Operate VDC 3.5 4.2 6.3 8.4 12.6 16.8 33.6 Max Continuous VDC 12.0 14.5 22.0 29.5 44.0 54.0 102.0 Coil Resistance Ohms ± 10% 110 160 360 660 1,500 2,200 8,000 ORDER NUMBER 1 Form A (SPST-NO) AZ696–1A–5D AZ696–1A–6D AZ696–1A–9D AZ696–1A–12D AZ696–1A–18D AZ696–1A–24D AZ696–1A–48D 1 Form C (SPDT) AZ696–1C–5D AZ696–1C–6D AZ696–1C–9D AZ696–1C–12D AZ696–1C–18D AZ696–1C–24D AZ696–1C–48D * Substitute “1B” in place of “1A” for 1 Form B contact. ADD suffix “E” to “1A” or “1B” or “1C” for silver tin oxide contacts. Add Suffix “E” at the end of order number for sealed version. INTERNATIONAL APPROVALS Germany VDE 0435/09.72 at 8 Amps VDE 0631/12.83 at 8 Amps VDE 0700/1/2.81 at 8 Amps MECHANICAL DATA Coil Temperature Rise 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 1.10 (28) .394 (10) 1.18 (30) .394 (10) Coil Temperature Rise ˚C .618 (15.7) .638 (16.2) .618 (15.7) .638 (16.2) .138 + .02 - 0 (3.5 + .5 - 0) .024 x .035 (0.6 x 0.9) 10A 0A 60% 80% 100% 120% 140% 160% 180% 200% 220% .138 + .02 - 0 (3.5 + .5 - 0) .024 x .035 (0.6 x 0.9) .024 x .039 (0.6 x 1) .024 x .039 (0.6 x 1) Percent of Nominal Coil Voltage at 20˚C 2 x ∅ .051 (1.3) PC BOARD LAYOUT WIRING DIAGRAM 1 3 4 .299 (7.6.) 1 FORM A 2 Maximum Switching Capacity 10.0 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 .122 (3.1) .748 (19) 2 x ∅.059 (1.5) .197 (5) 1 DC Resistive Load 2 x ∅.051 (1.3) FORM A FORM B 4 3 4 5 5 1 FORM C 2 .299 (7.6.) 1 CURRENT AC Resistive Load .122 (3.1) 1 FORM B 2 1.0 .9 .8 .7 .6 .5 .748 (19) .126 (3.2) .126 (3.2) 3 x ∅.059 (1.5) FORM C .4 .3 .2 Viewed toward terminals Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 1000 100 10 .1 VOLTAGE 400 500 600 700 800 900 50 60 70 80 90 200 300 20 30 40 04/15/05W