AZ6961-1A-48D

AZ6961 10 AMP SUBMINIATURE POWER RELAY FEATURES High sensitivity, 120 mW pickup Dielectric strength 5000 Vrms Isolation spacing greater than 8 mm 10 Amp switching capability Class B insulation standard, Class F version available Epoxy sealed version for automatic wave soldering and cleaning available • UL, CUR file E44211 • VDE 131637ÜG CONTACTS Arrangement Ratings SPDT (1 Form C) SPST (1 Form A) Resistive load: Max. switched power: 240 W or 2500 VA Max. switched current: 10 A Max. switched voltage: 240* VDC or 440 VAC UL, CUR Rating: 10 A at 250 VAC resistive [1] 8 A at 30 VDC/250 VAC [1] 8 A at 30 VDC/250 VAC, 100k cycles [2] B300 Pilot Duty [1] R300 Pilot Duty [1] 1/4 HP at 125 VAC [1] 1/2 HP at 250 VAC [1] VDE Rating: 8 A at 250 VAC • • • • • • GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 10 million 3 X 105 at 8 A 240 VAC res. 7 ms at nominal coil voltage 3 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time 1000 megohms min. at 20°C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 100°C (212°F) -40°C (-40°F) to 130°C (266°F) Class B -40°C (-40°F) to 155°C (311°F) Class F Break Contact: 5g at 10...500 Hz Make Contact: 20g at 10...500 Hz 10 g P.B.T. polyester, UL94 V-0 Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 8 grams *Note: if switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Material Silver cadmium oxide (AgCdO) [1] Silver tin oxide (AgSnO2) [2] Gold plating available < 100 milliohms initially Resistance COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 120 mW 1.2 W at 20°C (68°F) ambient 20°C (36°F) at nominal coil voltage Max. 130°C (266°F) Class B Max. 155°C (311°F) Class F Max. Solvent Temp. Max. Immersion Time Weight NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 4. Class F version not VDE approved 2/17/05W AZ6961 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 5 6 12 24 48 60 Max. Continuous VDC 11.6 14.0 27.2 53.1 107.3 122.4 Coil Resistance 113 ± 10% 164 ± 10% 617 ± 10% 2350 ± 10% 9600 ± 15% 12500 ± 15% Must Operate VDC 3.5 4.2 8.4 16.8 33.6 42.0 ORDER NUMBER* 1 Form A (SPST-NO) AZ6961–1A–5D AZ6961–1A–6D AZ6961–1A–12D AZ6961–1A–24D AZ6961–1A–48D AZ6961–1A–60D 1 Form C (SPDT) AZ6961–1C–5D AZ6961–1C–6D AZ6961–1C–12D AZ6961–1C–24D AZ6961–1C–48D AZ6961–1C–60D *Add “E” to “-1A” or “-1C” for AgSnO2 contacts. Add suffix “E” for sealed version. Add suffix “A” for gold plated contacts. Add suffix “F” for Class F version. MECHANICAL DATA FORM C VERSION 1.132 Max [28.75] .408 Max [10.35] PC BOARD LAYOUT 5xØ.051 [Ø1.3] .870 [22.1] .062 [1.57] .494 Max [12.55] .012 [0.3] .298 [7.56] FORM C .126 [3.2] .126 [3.2] .050 [1.3] .142 [3.6] 4xØ.051 [Ø1.3] .744 [18.9] .116 [2.95] .050 [1.3] 2x.020 [0.5] 3x.031 [0.8] 3x.016 [0.4] .298 [7.56] FORM A .198 [5.04] VIEWED TOWARD TERMINALS FORM A VERSION 1.132 Max [28.75] .408 Max [10.35] CIRCUIT DIAGRAM .494 Max [12.55] .012 [0.3] 1 FORM C .142 [3.6] 4 1 FORM A 4 2 3 5 2 5 2x.020 [0.5] 2x.031 [0.8] 2x.016 [0.4] VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 2/17/05W