AZ6991-1A-12DE

AZ6991 SENSITIVE SUBMINIATURE RELAY FEATURES • Extremely small footprint utilizing only 0.22 square inch of PCB area • Thin vertical profile only 0.196" wide • 6 Amp switching capability • High sensitivity, 95 mW pickup • Dielectric strength 4000 Vrms contact to coil • Coils to 60 VDC • Epoxy sealed version for wave soldering and cleaning available • Isolation spacing greater than 8 mm • UL/CUR file E43203, VDE file 40020561 GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Dielectric Strength (at sea level for 1 min.) Minimum operations 10 million operations 3 X 104 at 6 A, 30 VDC or 250 VAC Res. 8 ms at nominal coil voltage 4 ms at nominal coil voltage (with no coil suppression) 1000 Vrms between open contacts 4000 Vrms contact to coil 100 megohms min. at 20°C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 85°C (158°F) -40°C (-40°F) to 105°C (221°F) 0.062" DA 10–55 Hz 10 g P.B.T. polyester 94V-0 Tinned copper alloy, P.C. 260°C (500°F) 5 seconds 80°C (176°F) 30 seconds 5.4 grams CONTACTS Arrangement Ratings SPST (1 Form A) SPDT (1 Form C) Resistive load: Max. switched power: 180 W or 1662 VA Max. switched current: 6 A Max. switched voltage: 150* VDC or 400 VAC Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Rated Load UL/CUR VDE 6A at 277 VAC resistive 6A at 30 VDC resistive R300 Pilot Duty 6A at 250 VAC resistive 6A at 30 VDC resistive Silver nickel Silver nickel with gold plating Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Material COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 95 mW 1.0 W at 20°C (68°F) ambient 20°C (36°F) at nominal coil voltage Max. 105°C (221°F) Max. Immersion Time Weight NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 8/10/06W AZ6991 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 3 5 6 9 12 18 24 48 Must Operate VDC 2.25 3.75 4.50 6.75 9.00 13.5 18.0 36.0 Max. Continuous VDC 6.9 11.5 13.8 20.7 27.6 41.4 55.2 97.7 Coil Resistance 53 ± 10% 147 ± 10% 212 ± 10% 476 ± 10% 848 ± 10% 1906 ± 15% 3390 ± 15% 10600 ± 15% ORDER NUMBER* Unsealed AZ6991–1A–3D AZ6991–1A–5D AZ6991–1A–6D AZ6991–1A–9D AZ6991–1A–12D AZ6991–1A–18D AZ6991–1A–24D AZ6991–1A–48D AZ6991–1A–60D Sealed AZ6991–1A–3DE AZ6991–1A–5DE AZ6991–1A–6DE AZ6991–1A–9DE AZ6991–1A–12DE AZ6991–1A–18DE AZ6991–1A–24DE AZ6991–1A–48DE AZ6991–1A–60DE 60 45.0 122.2 16600 ± 15% *Substitute “-1C” for “-1A “ to indicate 1 Form C contacts. Add suffix “A” for gold plated contacts. MECHANICAL DATA Outline Dimensions Wiring Diagram 1 FORM A 0.591MAX [15.0] 0.138 [3.5] 0.039 [1.0] 0.02 [0.5] 0.035 [0.9] 0.02 * [0.5] 0.039 [1.0] 0.149 0.198 0.198 [3.78] [5.04] [5.04] 0.047 [1.2] 0.197 [5.0] 1 FORM C 0.645 [16.38] 1.102MAX [28.0] Viewed toward terminals * Missing on 1 Form A version 1 FORM A 1 FORM C 3-Ø0.051 [Ø1.3] 2-Ø0.039 [Ø1.0] 2-Ø0.051 [Ø1.3] 2-Ø0.039 [Ø1.0] 0.197 [5.0] 0.035 [0.9] 0.149 [3.78] 0.645 [16.38] 1.102 [28.0] 0.198 [5.04] 0.047 [1.2] 0.035 [0.9] 0.149 [3.78] 0.047 [1.2] 0.197 [5.0] 0.198 [5.04] 0.645 [16.38] 1.102 [28.0] 0.198 [5.04] Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 8/10/06W