AZ732-560-2

AZ732 MINIATURE POWER RELAY FEATURES • Dielectric strength 4000 Vrms coil to contact • Isolation spacing greater than 8 mm • Approvals/Standards include: UL, VDE, IEC, SEMKO, CEE • Double pole — Forms A, B, C, available • 10 Amp switching • SLIMPAK™ version saves board space • Epoxy sealed version for automatic wave soldering and cleaning • UL, CUR file E44211; VDE 4120–4940–4002/A1 CONTACTS Arrangement Ratings DPDT (2 Form C) Resistive load: Max. switched power: 300 W or 2770 VA Max. switched current: 10 A, 51 A for 2 ms Max. switched voltage: 150* VDC or 400 VAC UL Rating:10 A at 30 VDC or 277 VAC 1/8 HP 120 VAC motor load *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 30 million 1 x 105 at 10 A 30 VDC 1 x 105 at 10 A 115 VAC 7 ms at nominal coil voltage 2 ms at nominal coil voltage (with no coil suppression) Material Resistance Silver cadmium oxide < 30 milliohms initially (at rated current, voltage drop method) Dielectric Strength 4000 Vrms contacts to coil (at sea level for 1 min.) 2500 Vrms contact to contact 1000 Vrms between open contacts Insulation Resistance Dropout Ambient Temperature Operating 10,000 megohms min. at 20°C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage Standard: -55°C (-67°F) to 70°C (158°F) Sensitive: -55°C (-67°F) to 80°C (176°F) Both: -55°C (-67°F) to 110°C (230°F) 0.062" DA at 10–55 Hz 20 g P.B.T. polyester Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 20 grams COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Standard coil: 337 mW Sensitive coil: 250 mW 1.9 W at 20°C (68°F) ambient 1.4 W at 40°C (104°F) ambient Standard: 40°C (72°F) at nominal coil voltage Sensitive: 32°C (58°F) at nominal coil voltage Max. 110°C (230°F) Storage Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Temperature NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Unsealed relays should not be dip cleaned. 4. Specifications subject to change without notice. Max. Immersion Time Weight 7/26/02W AZ732 RELAY ORDERING DATA STANDARD RELAYS: 2 Form C (DPDT) Contacts COIL SPECIFICATIONS Nominal Max. Coil Must Coil Continuous Resistance Operate VDC VDC ± 10% VDC 5 8 38 3.5 6 12 24 48 5 6 12 24 48 10 19 35 74 9 11 21 43 86 58 215 740 3,200 47 70 270 1,100 4,400 4.2 8.4 16.8 33.6 3.5 4.2 8.4 16.8 33.6 HARDWARE ORDERING DATA DESCRIPTION Socket Retaining Clip ORDER NUMBER ST484–U1 ST482–2 ORDER NUMBER* Unsealed AZ732–125–2 AZ732–112–2 AZ732–08–2 AZ732–560–2 AZ732–04–2 AZ732–118–52 AZ732–509–52 AZ732–521–52 AZ732–053–52 AZ732–510–52 Sealed AZ2732–125–2 AZ2732–112–2 AZ2732–08–2 AZ2732–560–2 AZ2732–04–2 Maximum Switching Capacity 10.0 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 CURRENT SENSITIVE RELAYS: 2 Form C (DPDT) Contacts AZ2732–118–52 AZ2732–509–52 AZ2732–521–52 AZ2732–053–52 AZ2732–510–52 1.0 .9 .8 .7 .6 .5 .4 .3 .2 AC Resistive Load DC Resistive Load * Substitute “4 or 54,” “6 or 56” in place of “2 or 52” to indicate 2 Form A and 2 Form B respectively. VOLTAGE INTERNATIONAL APPROVALS Passed International Electrical Code IEC 380 Germany VDE VDE VDE VDE VDE 0860/8.81 paragraphs 10, 14 0806/8.81 paragraphs 7, 11, 15, 16, 29 0631/9.77 paragraphs 9, 12, 14 0730/T.1/3.72 paragraph 22 0435/9.72 (with production monitoring) Coil Temperature Rise Standard 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 60% 170 160 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 140% 60% Sensitive Coil Temperature Rise ˚C U.S.A. UL File E44211 Coil Temperature Rise ˚C 8A 0A 80% 100% 120% 8A 0A 160% 80% 180% 100% 200% 120% Percent of Nominal Coil Voltage (at 20˚C) Percent of Nominal Coil Voltage (at 20˚C) MECHANICAL DATA 1.11 MAX (28.1) .496 MAX (12.6) PC BOARD LAYOUT Viewed toward terminals .500 (12.7) HARDWARE .177 (4.5) MAX .354 (9.0) 1.03 (26.1) .197 (5) .197 (5) .051 DIA (1.3) (8 HOLES) .591 (15) 1.28 (32.5) 1.22 (30.9) .414 (10.5) .125 DIA (10.5) .366 (9.3) .154 (3.9) .024 (0.6) DIA * .016 .008 (0.4) (0.2) .040 (1.0) .075 (1.9) .295 (7.5) 1.217 (30.9) .158 (4.0) PC BOARD LAYOUT .295 (7.5) .197 (5.0) * SEALED VERSION STAND OFF .025 (0.6) WIRING DIAGRAMS 2 FORM C (DPDT) 8 7 6 1 5 4 3 2 7 6 1 4 3 2 1 2 2 FORM B (DPST-NC) 8 7 2 FORM A (DPST-NO) 5 4 1.044 (26.5) .792 (20.1) .197 (5.0) .059 DIA (1.5) .138 (3.5) Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" RETAINING CLIP .118 (3.0) Viewed toward terminals 1000 10 100 .1 500 600 700 800 900 20 30 40 50 60 70 80 90 200 300 400 7/26/02W