AZ733-2C-24D

AZ733 DPDT MINIATURE POWER RELAY FEATURES • • • • • • • • Dielectric strength 5000 Vrms Low cost Epoxy sealed version available 10 Amp switching — double pole contacts Isolation spacing greater than 8mm UL Class B insulation system UL, CUR file E44211 TÜV file R50129285 CONTACTS Arrangement Ratings DPST (2 Form A) DPDT (2 Form C) Resistive load: Max. switched power: 300 W or 2500 VA Max. switched current: 10 A Max. switched voltage: 150* VDC or 380 VAC *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 1 x 107 1 x 105 at 10 A 240 VAC Res. 8 ms at nominal coil voltage 5 ms at nominal coil voltage (with no coil suppression) Rated Load 10 A at 250 VAC General Use, 100k cycles[1][2][3] 10 A at 30 VDC N.O. Resistive 100k cycles [1] 10 A at 30 VDC N.C. Resistive 50k cycles [1] 10 A at 30 VDC N.O./N.C. Resistive 25k cycles[2][3] 1/4 HP at 240 VAC [1] 1/8 HP at 120 VAC [1] TV-3 at 125 VAC (2 Form A) [1] 5 A at 30 VDC, 250 VAC resistive, 100k cycles [1][2][3] [1] Silver cadmium oxide [2] Silver tin oxide [3] Silver nickel Silver cadmium oxide, silver tin oxide or silver nickel, gold plating available < 50 milliohms initially (24 V, 1 A voltage drop method) Dielectric Strength 5000 Vrms contact to coil (at sea level for 1 min.) 1000 Vrms between open contacts 3000 Vrms between contact sets Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Max. Solder Temp. 1000 megohms min. at 20°C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage -40°C (-40°F) to 90°C (194°F) -40°C (-40°F) to 130°C (266°F) 0.062" DA at 10–55 Hz 10 g P.B.T. polyester Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 18 grams TÜV Material Resistance COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 257 mW Max. Solder Time Max. Solvent Temp. Max. Immersion Time Weight 1.9 W at 20°C (68°F) ambient 34°C (61°F) at nominal coil voltage Max. 130°C (266°F) NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 4/9/09W AZ733 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 3 5 6 9 12 18 24 48 60 110 Must Operate VDC 2.1 3.5 4.2 6.3 8.4 12.6 16.8 33.6 42.0 79.3 Max. Continuous VDC 5.7 9.4 11.4 17.4 22.8 27.9 45.7 89.0 115.3 170.5 Coil Resistance 17 ±10% 47 68 160 275 650 1100 4170 7000 22900 ±10% ±10% ±10% ±10% ±10% ±15% ±15% ±15% ±15% ORDER NUMBER* Form A (DPST) AZ733–2A–3D AZ733–2A–5D AZ733–2A–6D AZ733–2A–9D AZ733–2A–12D AZ733–2A–18D AZ733–2A–24D AZ733–2A–48D AZ733–2A–60D AZ733–2A–110D Form C (DPDT) AZ733–2C–3D AZ733–2C–5D AZ733–2C–6D AZ733–2C–9D AZ733–2C–12D AZ733–2C–18D AZ733–2C–24D AZ733–2C–48D AZ733–2C–60D AZ733–2C–110D *Add suffix “E” to “2A” or “2C” for silver tin oxide contacts. Add suffix “B” to “2A” or “2C” for silver nickel contacts. Add suffix”E” for epoxy sealed version. Add suffix “A” for gold plated contacts. HARDWARE ORDERING DATA DESCRIPTION Socket ORDER NUMBER ST484–U1 DESCRIPTION Retainer ORDER NUMBER ST482–2 MECHANICAL DATA Form A and C 1.14 (29) .160 ± .015 (4.2 ± .4) .51 (13) PC BOARD LAYOUT Viewed toward terminals .590 (15) .197 .197 (5) (5) 1.02 (25.9) .295 (7.5) 0.015 (0.38) .08 (2.1) .05 DIA. (1.3) (Form C only) (6 places Form A) (8 places Form C) .354 (9.0) HARDWARE ST484-U1 .500 (12.7) Terminal No. 1,2,4,5,7,8 3,6 Dimensions Tol.: ± 0.005 (0.13) 0.018 (0.457) x 0.038 (0.965) 0.011 (0.279) x 0.038 (0.965) .177 (4.5) MAX 1.28 (32.5) .366 (9.3) 1.22 (30.9) .414 (10.5) .125 DIA (0.5) WIRING DIAGRAM Form A 1 8 3 6 4 5 1 8 Retaining Clip .295 (7.5) 4 5 .197 (5.0) .590 (15) .059 DIA (1.5) .197 (5.0) 1.217 (30.9) ST482-2 .158 (4.0) Form C 2 7 3 6 Viewed toward terminals 1.044 (26.5) .118 (3.0) Viewed toward terminals .138 (3.5) Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 4/9/09W