AZ755

AZ755

  • 厂商:

    AZETTLER

  • 封装:

  • 描述:

    AZ755 - 20 AMP MINIATURE POWER RELAY - American Zettler, Inc.

  • 详情介绍
  • 数据手册
  • 价格&库存
AZ755 数据手册
AZ755 20 AMP MINIATURE POWER RELAY FEATURES • • • • • • • • Dielectric strength 5000 Vrms Low cost Epoxy sealed version available 20 Amp switching — single pole contacts Isolation spacing greater than 8mm UL Class B insulation system standard, Class F available UL, CUR file E44211 TÜV file R50129286 GENERAL DATA SPST (1 Form A, 1 Form B) SPDT (1 Form C) Resistive load: Max. switched power: 480 W or 5540 VA Max. switched current: 20 A Max. switched voltage: 150* VDC or 380 VAC *Note: If switching voltage is greater than 30 VDC, special CONTACTS Arrangement Ratings Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 5 x 106 5 x 104 at 16 A 240 VAC Res. 2 x 104 at 20 A 277 VAC Res. 8 ms at nominal coil voltage 5 ms at nominal coil voltage (with no coil suppression) precautions must be taken. Please contact the factory. Rated Load UL, CUR 20 A at 277 VAC N.O. resistive, 50k cycles 16 A at 240 VAC general use, 100k cycles 12 A at 277 VAC N.O. resistive., 100k cycles 20 A at 24 VDC resistive 1 HP 240 VAC TV-8 120 VAC N.O. (silver tin oxide only) 16 A at 30 VDC, 250 VAC resistive, 30k cycles* 13 A at 420 VAC resistive, 30k cycles * *approval for form A , C, and Class F only Silver cadmium oxide (silver tin oxide available) < 50 milliohms initially (24 V, 1 A voltage drop method) Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure 1000 megohms min. at 20°C 500 VDC 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 90°C (194°F) -40°C (-40°F) to 130°C (266°F) 0.062" DA at 10–55 Hz 10 g P.B.T. polyester Tinned copper alloy, P. C. 270°C (518°F) 5 seconds 80°C (176°F) 30 Seconds 18.5 grams TÜV Material Resistance COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 270 mW Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. 1.9 W at 20°C (68°F) ambient 34°C (61°F) at nominal coil voltage Weight Max. 130°C (266°F) Max. Immersion Time NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 4/24/09W AZ755 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 5 6 9 12 18 24 48 60 110** Must Operate VDC 3.6 4.3 6.5 8.6 13.0 17.3 34.6 43.2 79.3 Max. Continuous VDC 9.4 11.4 17.4 22.8 27.9 45.7 89.0 115.3 170.5 Coil Resistance 47 ±10% 69 ±10% 155 ±10% 275 ±10% 620 ±10% 1100 ±15% 4400 ±15% 6880 ±15% 22900 ±15% ORDER NUMBER* Form A (SPST) AZ755–1A–5D AZ755–1A–6D AZ755–1A–9D AZ755–1A–12D AZ755–1A–18D AZ755–1A–24D AZ755–1A–48D AZ755–1A–60D AZ755–1A–110D Form C (SPDT) AZ755–1C–5D AZ755–1C–6D AZ755–1C–9D AZ755–1C–12D AZ755–1C–18D AZ755–1C–24D AZ755–1C–48D AZ755–1C–60D AZ755–1C–110D *Add suffix “E” for epoxy sealed version, suffix “A” for AgSnO (silver tin oxide) contacts. Substitute “1B” in place of “1A” or “1C” to indicate 1 Form B contact arrangement. Add suffix “F” for Class F. **110V coil not TÜV approved. HARDWARE ORDERING DATA DESCRIPTION Socket ORDER NUMBER ST484–U1 DESCRIPTION Retainer ORDER NUMBER ST482–2 MECHANICAL DATA Form A and C 1.14 (29) .160 ± .015 (4.2 ± .4) .51 (13) PC BOARD LAYOUT .590 (15) .197 .197 (5) (5) (Form A and C only) .295 (7.5) 1.06 (26.8) 0.015 (0.38) .08 (2.1) .05 DIA. (1.3) (Form B & C only) (6 places Form A & B) (8 places Form C) Viewed toward terminals ST484-U1 Terminal No. Dimensions Tol.: ± 0.005 (0.13) 1,2,4,5,7,8 0.018 (0.457) x 0.038 (0.965) 3,6 0.011 (0.279) x 0.038 (0.965) 1.22 (30.9) .500 (12.7) HARDWARE .177 (4.5) MAX 1.28 (32.5) .366 (9.3) .354 (9.0) WIRING DIAGRAM Form A 1 8 3 6 4 5 1 8 Form B 2 7 3 6 1 8 Form C 2 7 3 6 4 5 .295 (7.5) .414 (10.5) .125 DIA (0.5) RETAINING CLIP .197 (5.0) 1.217 (30.9) .158 (4.0) Viewed toward terminals .197 (5.0) .590 (15) .059 DIA (1.5) .138 (3.5) 1.004 (26.5) .118 (3.0) Viewed toward terminals ST482-2 Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 4/24/09W
AZ755
物料型号: - AZ755-1A-5D, AZ755-1C-5D, AZ755-1A-6D, AZ755-1C-6D, AZ755-1A-9D, AZ755-1C-9D, AZ755-1A-12D, AZ755-1C-12D, AZ755-1A-18D, AZ755-1C-18D, AZ755-1A-24D, AZ755-1C-24D, AZ755-1A-48D, AZ755-1C-48D, AZ755-1A-60D, AZ755-1C-60D, AZ755-1A-110D, AZ755-1C-110D。

器件简介: - AZ755是一款20安培小型功率继电器,具有5000Vrms的介电强度、低成本、环氧密封版本可选、20安培开关单极触点、隔离间距大于8mm、符合UL Class B绝缘系统标准(Class F可选)、UL、CUR文件E44211、TÜV文件R50129286。

引脚分配: - 表格中提供了SPST(单刀单掷)和SPDT(单刀双掷)的引脚排列。

参数特性: - 电阻负载:最大切换功率480W或5540VA,最大切换电流20A,最大切换电压150VDC或380VAC。 - UL、CUR额定负载:20A在277VAC N.O.电阻性负载下,50k周期;16A在240VAC一般用途下,100k周期等。 - 线圈寿命:机械电气最小操作次数5x10^6次和5x10^4次。 - 操作时间和释放时间:分别为8ms和5ms(在额定线圈电压下)。 - 绝缘电阻:最小1000兆欧姆,在20°C、500VDC、50%RH条件下。 - 环境温度:工作温度-40°C至90°C,存储温度-40°C至130°C。

功能详解: - 继电器可能在低于“必须操作”值的情况下被拉动。 - 所有值在20°C下测量。 - 规格如有变更,恕不另行通知。

应用信息: - 该继电器适用于需要20安培开关能力的场合,如家用电器、工业控制等。

封装信息: - 封装材料为P.B.T.聚酯。 - 端子材料为镀锡铜合金。 - 最高焊接温度270°C,最大焊接时间5秒。 - 最高溶剂温度80°C,最大浸泡时间30秒。 - 重量18.5克。
AZ755 价格&库存

很抱歉,暂时无法提供与“AZ755”相匹配的价格&库存,您可以联系我们找货

免费人工找货