AZ760-1A-6D

AZ760 20 AMP MINIATURE POWER RELAY FEATURES • • • • • • • Low cost 20 Amp switching 60 Amp inrush current Class B insulation system Quick connect terminals Flux tight construction UL, CUR file E44211 CONTACTS Arrangement Ratings SPST (1 Form A) Resistive load: Max. switched power: 600 W or 4400 VA Max. switched current: 20 A Max. switched voltage: 150* VDC or 400 VAC *Note: If switching voltage is greater than 30 VDC, special GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 1 x 107 1 x 105 at 20 A 220 VAC Res. 15 ms at nominal coil voltage 10 ms at nominal coil voltage (with no coil suppression) precautions must be taken. Please contact the factory. Rated Load UL, CUR Material Resistance 20 A at 220 VAC, 100k cycles 1.5 HP 250 VAC, 100k cycles Silver cadmium oxide < 50 milliohms initially (24 V, 1 A voltage drop method) Dielectric Strength 2000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration 1000 megohms min. at 20°C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 90°C (194°F) -40°C (-40°F) to 130°C (266°F) 0.062" DA at 10–55 Hz COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 441 mW Shock Operating 20 g, 11 ms, 1/2 sine (no false operation) Non-Operating 100 g, 11 ms, 1/2 sine (no damage) Enclosure Terminals 3.0 W at 20°C (68°F) ambient 35°C (63°F) at nominal coil voltage Max. 130°C (266°F) Max. Solder Temp. Max. Solder Time P.B.T. polyester Tinned copper alloy P. C. & quick connect Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. 270°C (518°F) 5 seconds 40 grams NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. Weight 2/703W AZ760 RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 6 12 24 48 Must Operate VDC 4.2 8.4 16.8 33.6 Max. Continuous VDC 11.0 22.0 43.8 87.6 Coil Resistance ± 10% 40 160 640 2560 ORDER NUMBER Form A (SPST) AZ760–1A–6D AZ760–1A–12D AZ760–1A–24D AZ760–1A–48D MECHANICAL DATA WIRING DIAGRAM 0.452 (11.5) 0.032 (0.8) 2 pl 0.092 (2.3) 0.420 (10.7 ) 0.250 (6.4) 2 pl 4 0.225 (5.7) 3 2 1 Viewed toward terminals 1.20 max. (30.5 max.) PC BOARD LAYOUT 1.068 (27.1) 0.142 (3.6) 0.465 (11.8) 0.060 (1.5) 0.180 (4.6) 0.052 (1.3) 0.032 (0.8) 0.054 (1.4) 0.728 max. (18.5 max.) 0.016 (0.4) .130 (3.3) ø0.070 (1.8) 4 pl 0.855 (21.7) 1 22 max Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 2/703W