AZ762FH-1AB-5DF

AZ762F AZ 20 A SPST MINIATURE POWER RELAY WITH QUICK CONNECTS FEATURES • • • • • • • • High temperature operation 125°C Dielectric strength 5000 Vrms 10 kV surge withstand 20 Amp switching Low profile Quick connects, Horizontal or Vertical Class F (155°C) standard Isolation spacing greater than 10 mm UL, CUR file E44211, VDE 40006031 CONTACTS Arrangement Ratings SPST (1 Form A, 1 Form B) Resistive load: Max. switched power: 600 W or 5540 VA Max. switched current: 20 A Max. switched voltage: 150* VDC or 440 VAC *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 1 x 107 1 x 105 at 20 A 277 VAC general use 7 ms at nominal coil voltage 3 ms at nominal coil voltage (with no coil suppression) Rated Load UL, CUR VDE 20 A at 277 VAC general use, 100k cycles 18 A at 250 VAC, Res., 20k cycles (N.O.) 16 A at 250 VAC, Res., 80k cycles 12 A at 400 VAC, Res., 80k cycles Silver nickel, (gold plating available) < 50 milliohms initially (using 6 V 1 A method) Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance Dropout Ambient Temperature Operating Storage 1000 megohms min. at 20°C 500 VDC 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 125°C (257°F) -40°C (-40°F) to 155°C (311°F) 0.062" DA at 10–55 Hz 10 g P.B.T. polyester Tinned copper alloy, P. C., QC 270°C (518°F) 5 seconds 80°C (176°F) 30 Seconds 14 grams Material Resistance COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Max. Temperature 196 mW Vibration Shock Enclosure Terminals 1.7 W at 20°C (68°F) ambient 26°C (47°F) at nominal coil voltage 155° (311°F) Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time Weight NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 7/17/07W AZ762F RELAY ORDERING DATA COIL SPECIFICATIONS Nominal Coil VDC 5 6 12 24 48 60 Must Operate VDC 3.5 4.2 8.4 16.8 33.6 42.0 Max. Continuous VDC 10.2 12.3 24.7 49.4 98.0 112.9 Coil Resistance 62 ± 10% 90± 10% 360 ± 10% 1,440 ± 10% 5,760 ± 15% 7,500 ± 15% ORDER NUMBER* Vertical Quick Connects AZ762FV–1AB–5DF AZ762FV–1AB–6DF AZ762FV–1AB–12DF AZ762FV–1AB–24DF AZ762FV–1AB–48DF AZ762FV–1AB–60DF Horizontal Quick Connects AZ762FH–1AB–5DF AZ762FH–1AB–6DF AZ762FH–1AB–12DF AZ762FH–1AB–24DF AZ762FH–1AB–48DF AZ762FH–1AB–60DF *Substitute “-1B” in place of “-1A” for 1 Form B. For gold plated contacts change “DF” to “DAF”. MECHANICAL DATA Outline Dimensions Quick connect terminals vertical Form A,B 1.240MAX [31.5] 1.142 [29.0] .512MAX [13.0] 1.240MAX [31.50] 1.142 [29.00] PC Board Layout Quick connect terminals horizontal Form A,B .512MAX [13.0] .248 [6.3] .248 [6.3] FORM A,B .630MAX [16.0] .012 [0.3] .559 [14.2] .630MAX [16.0] .012 [0.3] .591 [15.0] 2-Ø.051 [Ø1.30] .031 [0.8] 1.280 [32.50] .197 [5.00] .161 [4.1] .161 [4.1] .020 [0.5] .020 [0.5] 1.614MAX [41.0MAX] .031 [0.8] 1.614MAX [41.0MAX] 1.772MAX [45.0MAX] .295 [7.50] 4-Ø.059 [Ø1.50] .098 [2.50] 1.280 [32.5] .197 [5.0] .098 [2.50] 1.280 [32.5] .197 [5.0] .295 [7.5] .295 [7.5] BOTTOM VIEW BOTTOM VIEW Wiring Diagram Form A Form B Dimensions in inch with millimeters in brackets below. Tolerance: ± .010" 7/17/07W