AZ763-1C-12AE

AZ763 AZ 12 A SPDT MINIATURE POWER RELAY FEATURES • • • • • • • • • Dielectric strength 5000 Vrms Low height: 15.7 mm Epoxy sealed version available 12 Amp switching AC and DC coils Isolation spacing greater than 10 mm Proof tracking index (PTI/CTI) 250 Surpasses requirements of VDE 0631/0700 UL, CUR file E43203; VDE 112904 GENERAL DATA SPDT (1 Form C) SPST (N.O.) (1 Form A) Resistive load: Max. switched power: 360 W or 3000 VA Max. switched current: 12 A Max. switched voltage: 300* VDC or 400 VAC *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. CONTACTS Arrangement Ratings Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 3 x 107 1 x 105 at 12 A 240 VAC res. 7 ms at nominal coil voltage 3 ms at nominal coil voltage (with no coil suppression) Rated Load UL, CUR VDE Material Resistance Dielectric Strength 5000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance Dropout Ambient Temperature Operating 1000 megohms min. at 20°C 500 VDC 50% RH Greater than 10% of nominal coil voltage - DC Greater than 15% of nominal coil voltage - AC At nominal coil voltage -40°C (-40°F) to 90°C (194°F) - DC coils -40°C (-40°F) to 75°C (167°F) - AC coils -40°C (-40°F) to 115°C (239°F) 0.062" DA at 10–55 Hz 30 g P.B.T. polyester, UL-94 : V0 Tinned copper alloy, P. C. 270°C (518°F) 5 seconds 80°C (176°F) 30 Seconds 14 grams 12 A at 250 VAC resistive 12 A at 250 VAC Silver nickel or silver nickel gold plated < 100 milliohms initially COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Max. Temperature 200 mW (DC coil) .422 VA (AC coil) 1.7 W at 20°C (68°F) ambient 26°C (47°F) at nominal coil voltage 115°C (239°F) Storage Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. Max. Immersion Time Weight 6/11/04W AZ763 AZ RELAY ORDERING DATA COIL SPECIFICATIONS - DC Coil Nominal Coil VDC 3 5 6 9 12 18 24 36 48 60 110 Must Operate VDC 2.1 3.5 4.2 6.3 8.4 12.6 16.8 25.2 33.6 42.0 77.0 Max. Continuous VDC 7.6 12.7 15.3 22.9 30.6 45.9 61.2 92 122.0 153.0 280.0 Coil Resistance ± 10% 22 60 90 200 360 710 1,440 3,140 5,700 7,500 25,200 3.5 mm STD AZ763–1C–3D AZ763–1C–5D AZ763–1C–6D AZ763–1C–9D AZ763–1C–12D AZ763–1C–18D AZ763–1C–24D AZ763–1C–36D AZ763–1C–48D AZ763–1C–60D AZ763–1C–110D Unsealed 5 mm STD Left AZ763L–1C–3D AZ763L–1C–5D AZ763L–1C–6D AZ763L–1C–9D AZ763L–1C–12D AZ763L–1C–18D AZ763L–1C–24D AZ763L–1C–36D AZ763L–1C–48D AZ763L–1C–60D AZ763L–1C–110D ORDER NUMBER* Sealed 3.5mm AZ763–1C–3DE AZ763–1C–5DE AZ763–1C–6DE AZ763–1C–9DE AZ763–1C–12DE AZ763–1C–18DE AZ763–1C–24DE AZ763–1C–36DE AZ763–1C–48DE AZ763–1C–60DE AZ763–1C–110DE 5 mm STD Left AZ763L–1C–3DE AZ763L–1C–5DE AZ763L–1C–6DE AZ763L–1C–9DE AZ763L–1C–12DE AZ763L–1C–18DE AZ763L–1C–24DE AZ763L–1C–36DE AZ763L–1C–48DE AZ763L–1C–60DE AZ763L–1C–110DE COIL SPECIFICATIONS - AC Coil Nominal Coil VAC 12 24 48 60 110 115 120 220 230 Must Operate VAC 9.0 18.0 36.0 45.0 82.5 86.3 90.0 165.0 172.5 Max. Continuous VAC 18.0 36.0 72.0 90.0 165.0 172.5 180.0 330.0 345.0 Nominal Current mA ± 10% 63.0 31.3 15.6 12.5 6.8 6.5 6.3 3.4 3.3 Coil Resistance ± 10% 100 400 1550 2600 8900 9600 10200 35500 38500 ORDER NUMBER* Unsealed 3.5 mm STD 5 mm STD Left AZ763–1C–12A AZ763–1C–24A AZ763–1C–48A AZ763–1C–60A AZ763–1C–110A AZ763–1C–115A AZ763–1C–120A AZ763–1C–220A AZ763–1C–230A AZ763L–1C–12A AZ763L–1C–24A AZ763L–1C–48A AZ763L–1C–60A AZ763L–1C–110A AZ763L–1C–115A AZ763L–1C–120A AZ763L–1C–220A AZ763L–1C–230A Sealed 3.5mm AZ763–1C–12AE AZ763–1C–24AE AZ763–1C–48AE AZ763–1C–60AE AZ763–1C–110AE AZ763–1C–115AE AZ763–1C–120AE AZ763–1C–220AE AZ763–1C–230AE 5 mm STD Left AZ763L–1C–12AE AZ763L–1C–24AE AZ763L–1C–48AE AZ763L–1C–60AE AZ763L–1C–110AE AZ763L–1C–115AE AZ763L–1C–120AE AZ763L–1C–220AE AZ763L–1C–230AE 240 180.0 360.0 3.1 42500 AZ763–1C–240A AZ763L–1C–240A AZ763–1C–240AE AZ763L–1C–240AE *For 5 mm “Right” spacing substitute “AZ763R” for “AZ763L”. For Form A contacts substitute “-1A” for “-1C”. For gold plated contacts substitute “-1AG” for “-1A” or “-1CG” for “-1C”. NOTE: Form A contacts only available for DC coil versions. MECHANICAL DATA 1.142 Max. [29.0] .500 Max. [12.7] 1 WIRING DIAGRAM 2 1 2 3 HARDWARE ST482-U1 .500 (12.7) HARDWARE ORDERING DATA DESCRIPTION 1.28 (32.5) .618 Max. [15.7] 5 4 1 FORM A STANDARD & LEFT 4 5 4 1 FORM C STANDARD & LEFT 4 1.22 (30.9) .414 (10.5) .154 [3.9] 3 x .020 [0.5] 5 5 .125 DIA (3.2) Socket ORDER NUMBER ST482–U1 .354 (9.0) .177 MAX. (4.5) 2 x ø.024 [ø0.6] 1 3 1 FORM A RIGHT 1 2 1 FORM C RIGHT 3 3 x .035 [0.9] VIEWED TOWARD TERMINALS .366 (9.3) DESCRIPTION .295 (7.5) PC BOARD LAYOUT .138 [3.5] 5 x ø.051 [ø1.3] .138 [3.5] Retainer ORDER NUMBER VIEWED TOWARD TERMINALS .276 (7.0) .197 [5.0] 5 x ø.051 [ø1.3] .098 [2.5] .197 [5.0] .098 [2.5] .787 [20.0] .059 DIA (1.5) .792 (20.1) ST482–2 .098 [2.5] * .787 [20.0] .295 [7.5] * .787 [20.0] .295 [7.5] .098 [2.5] * 5 x ø.051 [ø1.3] .197 [5.0] .295 [7.5] RETAINING CLIP .098 [2.5] .098 [2.5] .197 [5.0] .118 (3.0) 1.385 [35.19] AZ763 3.5mm SPACING 1 FORM C AZ763L 5.0mm LEFT SPACING 1 FORM C AZ763R 5.0mm RIGHT SPACING 1 FORM C .895 [22.73] .661 [16.79] * Not used on 1 Form A relay Viewed toward terminals ST482-3 Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 6/11/04W