AZ7671-1A-12D

AZ7671 10 AMP SUBMINIATURE POWER RELAY FEATURES • • • • • • Small footprint Low cost Epoxy sealed version available 10 Amp switching UL, CUR E44211 TuV pending GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Minimum operations 1 x 107 1 x 105 at 5 A 240 VAC Res. 8 ms at nominal coil voltage 5 ms at nominal coil voltage (with no coil suppression) CONTACTS Arrangement Ratings SPST (1 Form A) SPDT (1 Form C) Resistive load: Max. switched power: 150 W 1250 VA Release Time (typical) Dielectric Strength 4000 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms between open contacts Insulation Resistance Dropout 1000 megohms min. at 20°C 500 VDC 50% RH Greater than 5% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 70°C (158°F), standard -40°C (-40°F) to 130°C (266°F) 0.062" DA at 10–50 Hz 100g for 11ms 1/2 sine pulse P.B.T. polyester Tinned copper alloy, P. C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 6 grams Max. switched current: 10 A Ambient Temperature Operating Storage Max. switched voltage: 30 VDC or 277 VAC *Note: If switching voltage is greater than 30 VDC, special Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time precautions must be taken. Please contact the factory. Rated Load UL, CUR 5A at 250 VAC 10A at 125 VAC 4.2 A at 277 VAC 1/4 HP at 120/240/277 VAC TV - 5 at 120 VAC Pilot Duty at 24 VA, 24 VAC 125 VA at 120/240/277 VAC C150 at 120 VAC TUV 5A at 250 VAC 5A at 28 VDC Max. Solvent Temp. Max. Immersion Time Weight COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation 253 mW standard 113 mW sensitive 1.25 W at 20°C (68°F) ambient 41°C (74°F) at nominal coil voltage, standard 22°C (40°F) at nominal coil voltage, sensitive Max. 105°C (221°F) Material Resistance silver nickel