AZ822-2C-48DSE

AZ822 SUBMINIATURE DIP RELAY FEATURES • • • • • • • • • Low profile for compact board spacing DC coils to 48 VDC Life expectancy to 10 million operations Standard PC 0.1" grid terminal spacing Fits standard 16 pin IC socket Epoxy sealed for automatic wave soldering and cleaning Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric UL, CUR file E43203 GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Minimum operations 1 x 108 5 x 105 at 1 A 30 VDC 5 ms at nominal coil voltage 2 ms at nominal coil voltage (with no coil suppression) Contact to contact: 1.2 pF Contact set to contact set: 1.6 pF Contact to coil: 1.5 pF At 10 mA contact current 2 ms at operate N.O. side 3 ms at operate N.C. side CONTACTS Arrangement Ratings DPDT (2 Form C) Bifurcated crossbar contacts Resistive load: Max. switched power: 60 W or 125 VA Max. switched current: 2 A Max. switched voltage: 220 VDC or 250 VAC UL Rating: 1 A at 24 VDC 0.5 A at 120 VAC Material Resistance Silver palladium, gold clad < 50 milliohms initially Release Time (typical) Capacitance (max.) Bounce (typical) Dielectric Strength 1000 Vrms contact to coil (at sea level for 1 min.) 1000 Vrms contact to contact 1000 Vrms between contact sets Insulation Resistance Dropout 1000 megohms min. at 20°C, 500 VDC, 50% RH Greater than 5% of nominal coil voltage At nominal coil voltage -55°C (-67°F) to 90°C (194°F) -55°C (-67°F) to 105°C (221°F) 0.062" DA at 10–55 Hz 20 g P.B.T. polyester (UL94 V-0) Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 4.5 grams COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 98 mW - Standard coils 74 mW - Sensitive coils 0.94 W at 20°C (68°F) 15°C (27°F) at nominal coil voltage Max. 105°C (221°F) Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Relay adjustment may be affected if undue pressure is exerted on relay case. 4. Specifications subject to change without notice. Max. Immersion Time Weight 3/3/04W AZ822 RELAY ORDERING DATA COIL SPECIFICATIONS - STANDARD Nominal Coil VDC 3 5 6 9 12 24 48 Nominal Coil VDC 3 5 6 9 12 18 24 48 Max. Continuous VDC 6.5 10.8 13.0 19.5 26.5 52.9 103.9 Max. Continuous VDC 7.5 12.5 15.0 22.5 30.0 40.0 52.9 84.9 Coil Resistance ± 10% 45 125 180 405 720 2880 11520 Coil Resistance ± 10% 60 167 240 540 960 1620 2880 7680 Must Operate VDC 2.1 3.5 4.2 6.3 8.4 16.8 33.6 Must Operate VDC 2.1 3.5 4.2 6.3 8.4 12.6 16.8 33.6 ORDER NUMBER AZ822–2C–3DE AZ822–2C–5DE AZ822–2C–6DE AZ822–2C–9DE AZ822–2C–12DE AZ822–2C–24DE AZ822–2C–48DE COIL SPECIFICATIONS - SENSITIVE ORDER NUMBER AZ822–2C–3DSE AZ822–2C–5DSE AZ822–2C–6DSE AZ822–2C–9DSE AZ822–2C–12DSE AZ822–2C–18DSE AZ822–2C–24DSE AZ822–2C–48DSE MECHANICAL DATA .787 (20) .472 (12) .015 (0.38) .386 (9.8) .138 (3.5) .044 (1.11) .300 (7.61) .200 (5.07) .200 (5.07) (.020 ± .005) (0.5 ± 0.13) TYP .010 ± .005 (0.25 ± 0.13) TYP PC BOARD LAYOUT 0.03 DIA (0.8) (8 HOLES) .047 (1.2) REF WIRING DIAGRAM 1 4 6 8 .047 (1.2) REF 16 0.1 (2.54) 13 11 9 Viewed toward terminals Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 3/3/04W