AZ826-2C-24DME

AZ826 SUBMINIATURE ULTRA-SENSITIVE DIP RELAY FEATURES • • • • • • • • • • • Low profile for compact board spacing DC coils to 24 VDC Bifurcated crossbar contacts Ultra-sensitivity, 84 mW pickup Life expectancy to 10 million operations High switching capacity, 24 W, 125 VA Fits standard 16 pin IC socket Epoxy sealed for automatic wave soldering and cleaning Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric UL, CUR file E43203 GENERAL DATA DPDT (2 Form C) Resistive load: Max. switched power: 24 W or 125 VA Max. switched current: 2 A Max. switched voltage: 150 VDC or 220 VAC Rated Load UL Material Resistance 2.0 A at 30 VDC 1.0 A at 125 VAC Silver, gold plated < 50 milliohms initially Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 1 x 107 1 x 105 at 1.0 A 120 VAC Res. 6 ms at nominal coil voltage 5 ms at nominal coil voltage (with no coil suppression) CONTACTS Arrangement Ratings Dielectric Strength 1500 Vrms contact to coil (at sea level for 1 min.) 500 Vrms between open contacts 1500 Vrms contact set to contact set Insulation Resistance Dropout 1000 megohms min. at 20°C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) standard -40°C (-40°F) to 80°C (176°F) sensitive -40°C (-40°F) to 85°C (185°F) ultra-sensitive -40°C (-40°F) to 105°C (221°F) 1.5 mm DA at 10–55 Hz 50 g 11 ms 1/2 sine P.B.T. polyester Tinned copper alloy 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 4.5 grams COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise 180 mW standard 100 mW sensitive 84 mW ultra-sensitive 1.2 W at 20°C (68°F) 34°C (61°F) standard 23°C (41°F) sensitive 19°C (34°F) ultra-sensitive Max. 105°C (221°F) Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Max. Solder Temp. Temperature Max. Solder Time NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Other coil resistances and sensitivities available upon request. 4. Specifications subject to change without notice. Max. Solvent Temp. Max. Immersion Time Weight 2/20/08W AZ826 RELAY ORDERING DATA STANDARD COIL SPECIFICATIONS Nominal Coil VDC 3 5 6 9 12 24 Nominal Coil VDC 3 5 6 9 12 24 Nominal Coil VDC 3 4.5 5 6 9 12 24 Max. Continuous VDC 5.5 9.2 11.0 16.4 21.9 43.8 Max. Continuous VDC 7.3 12.2 14.7 22.0 29.0 52.3 Max. Continuous VDC 8.5 12.7 14.2 17.0 25.4 33.9 67.9 Coil Resistance ± 10% 25 70 100 225 400 1600 Coil Resistance ± 10% 45 125 180 405 720 2880 Coil Resistance ± 10% 60 135 167 240 540 960 3840 Must Operate VDC 2.1 3.5 4.2 6.3 8.4 16.8 Must Operate VDC 2.1 3.5 4.2 6.3 8.4 16.8 Must Operate VDC 2.3 3.4 3.8 4.5 6.8 9.0 18.0 ORDER NUMBER AZ826-2C-3DME AZ826–2C–5DME AZ826–2C–6DME AZ826–2C–9DME AZ826–2C–12DME AZ826–2C–24DME SENSITIVE COIL SPECIFICATIONS ORDER NUMBER AZ826-2C-3DSE AZ826–2C–5DSE AZ826–2C–6DSE AZ826–2C–9DSE AZ826–2C–12DSE AZ826–2C–24DSE ULTRA-SENSITIVE COIL SPECIFICATIONS ORDER NUMBER AZ826–2C–3DSSE AZ826–2C–4.5DSSE AZ826–2C–5DSSE AZ826–2C–6DSSE AZ826–2C–9DSSE AZ826–2C–12DSSE AZ826–2C–24DSSE MECHANICAL DATA .795 Max. (20.2 Max.) .390 Max. (9.9 Max.) .010 (0.25) .472 Max. (12.0 Max.) .028 (0.72) .138 (3.5) .016 (.04) WIRING DIAGRAM 1 4 6 8 PC BOARD LAYOUT .300 (7.62 ) 16 13 11 9 .300 (7.62) .200 .200 (5.08) (5.08) .0.39 DIA (0.8) 8 HOLES Viewed toward terminals Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 2/20/08W