AZ932

AZ932 AZ 15 AMP MINIATURE PC BOARD RELAY FEATURES • • • • • • High performance Low seated height Flux tight and sealed versions available Class F insulation (155°C) system available Class B Insulation (130°C) standard UL, CUR file E43203 GENERAL DATA CONTACTS Arrangement SPST (1 Form A) SPST NC (1 Form B) SPDT (1 Form C) Form A, B and C Max. switched power: 210 W or 2400 VA Max. switched current: 15 A AC, 7 A DC Max. switched voltage: 30 VDC or 300 VAC 1 Form A 15 A at 120 VAC TV - 5 120 VAC 1 Form B NC 8.3 A at 120 VAC 3.6 A at 277 VAC 1000 VA, 90°C Ballast 1 Form B NC 15 A at 120 VAC 6.5 A at 277 VAC 1800 VA, 25° C Ballast 1 Form C 10 A at 120 VAC 100,000 cycles N.O. 10 A at 120 VAC 50,000 cycles N.C. Material Resistance Silver tin oxide (gold plating available) < 100 milliohms initially (6 V, 1 A voltage drop method) Life Expectancy Mechanical Electrical Operate Time Release Time 1x106 1 x 105 at 10 A 120 VAC Res. 10 ms max. 5 ms max. (with no coil suppression) Ratings Dielectric Strength 1500 Vrms contact to coil (at sea level for 1 min.) 1000 Vrms across contacts Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time 100 megohms min. at 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C(-40°F) to 80°C(176°F) -40°C(-40°F) to 130°C(266°F) 0.062" DA at 10–55 Hz 10 g P.B.T. polyester Tinned copper alloy, P.C. 270°C (500°F) 5 seconds 80°C (176°F) 30 seconds 10 g Rated Load UL/CUR COIL Power At Pickup Voltage Max Continuous Dissipation Temperature Rise (at nominal coil voltage) Weight 203 mW .6 W at 20°C (68°F) 27°C (49°F) Max. 130°C (266°F) NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Unsealed relays should not be dip cleaned. 4. Specifications subject to change without notice. Temperature 2/20/08W AZ932 RELAY ORDERING DATA STANDARD RELAYS COIL SPECIFICATIONS Nominal Coil VDC 3 5 6 9 12 18 24 48 Max. Continuous VDC 3.9 6.5 7.8 11.7 15.6 23.4 31.2 62.4 Coil Resistance 25 ±10% 70 ±10% 100 ±10% 225 ±10% 400 ±10% 900 ±10% 1,600 ±15% 4,500 ±15% Must Operate VDC 2.3 3.8 4.5 6.8 9.0 13.5 18.0 36.0 ORDER NUMBER* 1 Form A (SPST-N.O.) AZ932-1AH-3D AZ932–1AH–5D AZ932–1AH–6D AZ932–1AH–9D AZ932–1AH–12D AZ932-1AH-18D AZ932–1AH–24D AZ932–1AH–48D 1 Form C (SPDT) AZ932-1CH-3D AZ932–1CH–5D AZ932–1CH–6D AZ932–1CH–9D AZ932–1CH–12D AZ932-1CH-18D AZ932–1CH–24D AZ932–1CH–48D *Add suffix “E” for epoxy sealed version. Add suffix “G” for gold plated contacts. Add suffix “F” for Class F insulation system. Substitute “1BH” in place of “1AH” to indicate 1 Form B. MECHANICAL DATA Outline Dimensions PC Board Layout .079 [2.00] .157 [4.00] 2xø.051 [ø1.3] .089 [2.25] .236 [6.00] 2xø.039 [ø1.0] .079 [2.00] .480 [12.20] .012 [0.30] 2x.039 [1.00] .236 [6.00] 2x.020 [0.50] .089 [2.25] .236 [6.00] .079 [2.00] .157 [4.00] .480 [12.20] FORM "A"/ FORM “B” .827 [ 21] .630 [16 ] .799 [20.3] .157 [4] .472 [12.00] .039 [1.00] 2x.020 [0.50] 2x.018 [0.45] .089 [2.25] .236 [6.00] 2xø.039 [ø1.0] .480 [12.20] FORM "C" .472 [12.00] 3xø.051 [ø1.3] Wiring Diagram 2 3 2 3 2 3 1 5 FORM "A" 1 5 1 5 4 FORM "C" FORM "B" 2/20/08W