AZ934-2C-12DET

AZ934 AZ 20 AMP MINIATURE AUTOMOTIVE RELAY, SINGLE OR DUAL FEATURES • • • • • • • • • Up to 20 Amp switching capability in a compact size Sealed Two separate relays in DPDT (dual) version Quiet operation Vibration and shock resistant ISO/TS 16949, ISO 14000 Tested in accordance with SAE J2544 Cost effective Designed for power windows, power seats and wiper applications GENERAL DATA Life Expectancy Mechanical Electrical DPDT (2 Form C) SPDT (1 Form C) Max. switched power: 280 W Max. switched voltage: 100 VDC Max. switched current (make/break), continuous: 1 Form C: 25A/20A, 20A 2 Form C: 25A/20A, 20A Material Resistance Silver tin oxide (silver nickel available - contact factory) < 100 milliohms at 1A, 5 VDC Dielectric Strength (at sea level for 1 min.) CONTACTS Arrangement Ratings Minimum operations 1 x 107 operations 2 x 105 operations at 20 A 14 VDC Res. 3 ms at nominal coil voltage 1.5 ms at nominal coil voltage (with no coil suppression) 500 Vrms coil to contact 500 Vrms between open contacts 100 megohms min. at 20°C, 500 VDC, 50% RH > 8.3% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 100°C (212°F) -40°C (-40°F) to 155°C (311°F) 0.062" DA at 10–55Hz, 10 g at 55-200 Hz 30 g, 11 ms, functional Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 10 grams Operate Time (typical) Release Time (typical) Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Max. Temperature 203 mW 2.2 W 20°C (68°F) ambient 32°C (58°F) nominal coil VDC 155°C (311°F) Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time Weight NOTES 1. 2. 3. 4. All values at 20°C (68°F). Maximum make current refers to in-rush current of lamp load. Relay may pull in with less than “Must Operate” value. Specifications subject to change without notice. 9/27/06W AZ934 AZ RELAY ORDERING DATA COIL SPECIFICATIONS - DC Coil Nominal Coil VDC 12 Must Operate VDC 7.2 Max. Continuous VDC 24.0 Coil Resistance ±10% 255 ORDER NUMBER 1 Form C (SPDT) AZ934–1C–12DET 2 Form C (DPDT) AZ934–2C–12DET MECHANICAL DATA SPDT (1 Form C) .699 Max [17.8] .376 Max [9.6] DPDT (2 Form C) .699 Max [17.8] .671 Max [17.1] .53 Max [13.5] .020 [0.5] .53 Max [13.5] .020 [0.5] .138 [3.5] .138 [3.5] 6x.016 [0.4] 3x.016 [0.4] 2xØ.02 [Ø0.5] 6x.035 [0.9] 3x.035 [0.9] 4xØ.02 [Ø0.5] PC BOARD LAYOUT .541 [13.75] .087 [2.2] .110 [2.8] WIRING DIAGRAM PC BOARD LAYOUT .541 [13.75] .148 [3.75] WIRING DIAGRAM .087 [2.2] 4 3 2 1 3xØ.051 [Ø1.3] 3 2 .148 [3.75] .148 [3.75] 6xØ.051 [Ø1.3] 4xØ.035 [Ø0.9] .148 [3.75] .246 [6.25] Viewed toward terminals 2xØ.035 [Ø0.9] .110 [2.8] 10 5 9 8 7 6 .098 [2.5] Viewed toward terminals .246 [6.25] Viewed toward terminals .098 [2.5] Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± 0.010” 9/27/06W