AZ9402-1C-5D

AZ9402 10 AMP MINIATURE POWER RELAY FEATURES • • • • • 10 Amp switching capability SPST-N.O. and SPDT configurations Epoxy sealed version available UL, CUR E44211 TUV pending GENERAL DATA CONTACTS Arrangement Ratings SPST N.O. (1 Form A) SPDT (1 Form C) Resistive load: Max. switched power: 150 W or 1250 VA N.O. Max. switched current:10 A Max. switched voltage: 30 VDC* or 277 VAC *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Life Expectancy Mechanical Electrical Operate Time (max.) Release Time (max.) Minimum operations 1 x 107 1 x 105 at 10 A 120 VAC Res. 8 ms at nominal coil voltage 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 1000 Vrms contact to contact (at sea level for 1 min.) 4000 Vrms contact to coil Insulation Resistance Dropout Ambient Temperature Operating Storage 1 x 109 ohms minimum at 500 VDC Greater than 5% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 130°C (266°F) 0.062" DA at 10–55 Hz UL, CUR 5A at 250 VAC 10A at 125 VAC 4.2A at 277 VAC 1/4 HP at 120/240/277 VAC TV- 5 at 120 VAC Pilot Duty at 24 VA, 24 VAC ;125 VA at 120/240/277 VAC ; C150 at 120 VAC Vibration Shock Mechanical 100 g for 11 ms 1/2 sine pulse P.B.T. polyester Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 7 grams TUV Material Resistance 5A at 250 VAC 5A at 28 VDC Silver Nickel Enclosure Terminals Max. Solder Temp. < 0.1 Ohm (24 V, 1 A voltage drop method) Max. Solder Time Max. Solvent Temp. COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 253 mW (Standard Coil) 113 mW (Sensitive Coil) 1.25 W at 20°C (68°F) 40°C (72°F) (Standard Coil) 20°C (36°F) (Sensitive Coil) Max. 105°C (221°F) Max. Immersion Time Weight NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 4/02/09W AZ9402 RELAY ORDERING DATA COIL SPECIFICATIONS – Standard Coil (SPDT and SPST) Nominal Coil VDC 3 5 6 9 12 18 24 *Add suffix “E” for sealed version ORDER NUMBER* Coil Resistance ± 10% 20 56 80 180 320 720 1280 SPST-NO AZ9402–1A–3D AZ9402–1A–5D AZ9402–1A–6D AZ9402–1A–9D AZ9402–1A–12D AZ9402–1A–18D AZ9402–1A–24D SPDT AZ9402-1C-3D AZ9402-1C-5D AZ9402-1C-6D AZ9402-1C-9D AZ9402-1C-12D AZ9402-1C-18D AZ9402-1C-24D Must Operate VDC 2.25 3.75 4.5 6.75 9.0 13.5 18.0 Max. Continuous VDC 3.3 5.5 6.6 9.9 13.2 19.8 26.4 COIL SPECIFICATIONS – Sensitive Coil (SPST) Nominal Coil VDC 3 5 6 9 12 18 24 Must Operate VDC 2.25 3.75 4.5 6.75 9.0 13.5 18.0 Max. Continuous VDC 3.3 5.5 6.6 9.9 13.2 19.8 26.4 Coil Resistance ± 10% 45 125 180 405 720 1620 2880 ORDER NUMBER** Unsealed AZ9402–1A–3DS AZ9402–1A–5DS AZ9402–1A–6DS AZ9402–1A–9DS AZ9402–1A–12DS AZ9402–1A–18DS AZ9402–1A–24DS Sealed AZ9402-1A-3DSE AZ9402-1A-5DSE AZ9402-1A-6DSE AZ9402-1A-9DSE AZ9402-1A-12DSE AZ9402-1A-18DSE AZ9402-1A-24DSE MECHANICAL DATA PC BOARD LAYOUT .807 max. [20.50] .417 max. [10.59] .054 [1.36] .400 [10.16] .300 [7.62] .058 [1.49] .300 [7.62] .614 max. [15.60] .016 [0.40] 5 x ø.051 [ø1.3] .100 [2.54] * *omitted from Form A 5 x.150 [ 3. 8] WIRING DIAGRAM FORM A 5 x.031 [0.8] 5 x.012±.005 [0.31±0.12] FORM C VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 4/2/09W