AZ941-1C-12DE

AZ941 MINIATURE PC BOARD RELAY FEATURES • • • • • • • Contacts rated at 3, 5, 10 or 16 Amps DC coils to 48 V Extremely low cost Life expectancy to 10 million operations Epoxy sealed versions available UL, CUR file E44211; VDE 10056 5 Class B and F available GENERAL DATA CONTACTS Arrangement Ratings Light Duty SPDT (1 Form C) Form A available upon request Resistive load Max. switched power: 90 W or 750 VA Max. switched current: 3 A Max. switched voltage: 150* VDC or 300 VAC UL Rating: 3 A at 30 VDC or 250 VAC Max. switched power: 150 W or 1250 VA Max. switched current: 6 A Max. switched voltage: 150* VDC or 300 VAC UL Rating: 5 A at 30 VDC 6 A at 125 VAC 1/10 HP @ 125 VAC Max. switched power: 300 W or 2500 VA Max. switched current: 16 A Max. switched voltage: 150* VDC or 300 VAC UL Rating: 5 A at 30 VDC 16 A at 125 VAC 10 A at 277 VAC 1/4 HP @ 125 VAC 1/2 HP @ 250 VAC Max. switched Max. switched Max. switched UL Rating: 16 10 power: 300 W or 4000 VA current: 16 A voltage: 150* VDC or 300 VAC A at 125 VAC A at 30 VDC Release Time (typical) 2 ms at nominal coil voltage (with no coil suppression) Life Expectancy Mechanical Electrical Operate Time (typical) Minimum operations 1x107 1 x 105 at 12 A 120 VAC Res. 6 ms at nominal coil voltage Medium Duty Dielectric Strength 1500 Vrms contact to coil (at sea level for 1 min.) 750 Vrms contact to contact Meets FCC part 68.302 1500 V lightning surge Meets FCC part 68.304 1000 V dielectric Insulation Resistance Dropout Ambient Temperature Operating (Standard) Operating (Class B) Storage (Standard) Storage (Class B) Vibration Shock Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time Weight 100 megohms min. at 20°C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 95°C (203°F) -40°C (-40°F) to 105°C (221°F) -40°C (-40°F) to 130°C (266°F) 0.062" DA at 10–55Hz 10 g P.B.T. polyester Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 13 grams Heavy Duty Extra Heavy Duty *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Material Resistance Silver cadmium oxide < 100 milliohms initially COIL Power At Pickup Voltage (typical) Max Continuous Dissipation Temperature Rise Temperature 230 mW 1.4 W 20°C (68°F) ambient, standard 1.7 W 20°C (68°F) ambient, Class B 27°C (49°F) nominal coil voltage Max. 105°C (221°F) Max. 130°C (266°F) Class B Max. 155°C (311°F) Class F NOTES 1. 2. 3. 4. 5 All values at 20°C (68°F). Relay may pull in with less than “Must Operate” value. Unsealed relays should not be dip cleaned. Specifications subject to change without notice. Only AZ941-1CT version is VDE approved at 7A, 250 VAC. 8/7/03W AZ941 RELAY ORDERING DATA STANDARD RELAYS: Light Duty Type (3 Amp Contact) COIL SPECIFICATIONS Nominal Coil VDC 5 6 12 24 48 Max. Continuous VDC 9.9 11.8 23.6 47.3 94.6 Coil Resistance ±10% 70 100 400 1,600 6,400 Must Operate VDC 4.0 4.8 9.6 19.2 38.4 ORDER NUMBER Unsealed AZ941–1C–5D AZ941–1C–6D AZ941–1C–12D AZ941–1C–24D AZ941–1C–48D Sealed AZ941–1C–5DE AZ941–1C–6DE AZ941–1C–12DE AZ941–1C–24DE AZ941–1C–48DE STANDARD RELAYS: Medium Duty Type (5 Amp Contact) COIL SPECIFICATIONS Nominal Coil VDC 5 6 12 24 48 Max. Continuous VDC 9.9 11.8 23.6 47.3 94.6 Coil Resistance ±10% 70 100 400 1,600 6,400 Must Operate VDC 4.0 4.8 9.6 19.2 38.4 ORDER NUMBER Unsealed AZ941–1CH–5D AZ941–1CH–6D AZ941–1CH–12D AZ941–1CH–24D AZ941–1CH–48D Sealed AZ941–1CH–5DE AZ941–1CH–6DE AZ941–1CH–12DE AZ941–1CH–24DE AZ941–1CH–48DE STANDARD RELAYS: Heavy Duty Type (16 Amp Contact) COIL SPECIFICATIONS Nominal Coil VDC 5 6 9 12 24 48 Max. Continuous VDC 9.9 11.8 17.7 23.6 47.3 94.6 Coil Resistance ±10% 70 100 225 400 1,600 6,400 Must Operate VDC 4.0 4.8 7.2 9.6 19.2 38.4 ORDER NUMBER Unsealed AZ941–1CT–5D AZ941–1CT–6D AZ941–1CT–9D AZ941–1CT–12D AZ941–1CT–24D AZ941–1CT–48D Sealed AZ941–1CT–5DE AZ941–1CT–6DE AZ941–1CT–9DE AZ941–1CT–12DE AZ941–1CT–24DE AZ941–1CT–48DE STANDARD RELAYS: Extra Heavy Duty Type (16 Amp Contact) COIL SPECIFICATIONS Nominal Coil VDC 5 6 12 24 Max. Continuous VDC 10.9 13.0 26.0 52.1 Coil Resistance ±10% 70 100 400 1,600 6,400 Must Operate VDC 4.0 4.8 9.6 19.2 38.4 ORDER NUMBER* Unsealed AZ941–1CW–5DB AZ941–1CW–6DB AZ941–1CW–12DB AZ941–1CW–24DB AZ941–1CW–48DB Sealed AZ941–1CW–5DEB AZ941–1CW–6DEB AZ941–1CW–12DEB AZ941–1CW–24DEB AZ941–1CW–48DEB 48 104.3 *Add suffix “F” in place of “B” to indicate class F. MECHANICAL DATA PC BOARD LAYOUT .89 (22.5) .082 (2.1) .01 (0.3) .65 (16.5) .05 5 HOLES (1.3) .089 (2.3) WIRING DIAGRAM 2 .472 (12.0) .089 (2.3) .078 (2.0) .480 (12.2) 3 .65 (16.5) .01 (0.3) .040 (1.0) 5 PLACES .138 (3.5) 1 5 4 Viewed toward terminals Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010" 8/7/03W