AZ9431-1CH-5DE

AZ9431 15 AMP MINIATURE PC BOARD RELAY FEATURES • • • • • • High performance Low seated height 6 kV surge version available Flux tight and sealed versions available Class B insulation (130°C) standard, Class F (155°C) available UL, CUR file E43203 CONTACTS Arrangement Ratings Medium Duty SPST N.O. (1 Form A) SPDT (1 Form C) Max. switched power: 240 W or 1200 VA Max. switched current: 10 A Max. switched voltage: 150* VDC or 300 VAC Max. switched power: 360 W or 2500 VA Max. switched current: 15 A Max. switched voltage: 150* VDC or 300 VAC A A A A A at at at at at 120 VAC, General Use 24 VDC, General Use 250 VAC, General Use 120 VAC, General Use 24 VDC, General Use GENERAL DATA Life Expectancy Mechanical Electrical Operate Time Release Time 1 x 106 1 x 105 at 10 A 120 VAC res. 10 ms max. 5 ms max. (with no coil suppression) Heavy Duty UL/CUR Ratings Medium Duty 10 10 Heavy Duty 10 15 15 Dielectric Strength 3000 Vrms contact to coil (6 kV version) (at sea level for 1 min.) 1500 Vrms contact to coil 1000 Vrms across contacts Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration 100 megohms min. at 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C(-40°F) to 100°C(212°F) -40°C(-40°F) to 155°C(311°F) 0.062" DA at 10–55 Hz 10 g P.B.T. polyester Tinned copper alloy, P.C. 270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 10 g *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Material Resistance Medium Duty: Silver cadmium oxide Heavy Duty: Silver tin oxide < 100 milliohms initially (24 V, 1 A method) Shock Enclosure COIL Power At Pickup Voltage Max Continuous Dissipation Temperature Rise (at nominal coil voltage) Terminals Max. Solder Temp. 203 mW 1.7 W at 20°C (68°F) 22°C (40°F) Max. 130°C (266°F) Class B Max. 155°C (311°F) Class F Max. Solder Time Max. Solvent Temp. Max. Immersion Time Weight Temperature NOTES 1. 2. 3. 4. All values at 20°C (68°F). Relay may pull in with less than “Must Operate” value. Unsealed relays should not be dip cleaned. Specifications subject to change without notice. 5/26/05W AZ9431 RELAY ORDERING DATA STANDARD RELAYS COIL SPECIFICATIONS Nominal Coil VDC 5 6 9 12 18 24 48 Max. Continuous VDC 10.9 13.0 19.5 26.0 39.1 52.1 104.3 Coil Resistance ±10% 70 100 225 400 900 1,600 6,400 Must Operate VDC 3.8 4.5 6.8 9.0 13.5 18.0 36.0 ORDER NUMBER* Medium Duty 10 Amp contact) Unsealed Sealed AZ9431–1C–5D AZ9431–1C–5DE AZ9431–1C–6D AZ9431–1C–9D AZ9431–1C–12D AZ9431-1C-18D AZ9431–1C–24D AZ9431–1C–48D AZ9431–1C–6DE AZ9431–1C–9DE AZ9431–1C–12DE AZ9431-1C-18DE AZ9431–1C–24DE AZ9431–1C–48DE Heavy duty (15 Amp contact) Unsealed Sealed AZ9431–1CH–5D AZ9431–1CH–5DE AZ9431–1CH–6D AZ9431–1CH–9D AZ9431–1CH–6DE AZ9431–1CH–9DE AZ9431–1CH–12D AZ9431–1CH–12DE AZ9431–1CH–18D AZ9431–1CH–18DE AZ9431–1CH–24D AZ9431–1CH–24DE AZ9431–1CH–48D AZ9431–1CH–48DE *Substitute “1A” or “1AH” in place of “1C” or “1CH” to indicate 1 Form A. Add suffix “F” for Class F version. Add “H” to AZ9431 for 6 kV version. MECHANICAL DATA PC Board Layout .762 Max [19.25] .612 Max [15.25] .134 [3.40] .059 [1.49] .236[6.0] .602 Max [15.29] .185 [4.70] .012 [.30] .472 12.00 .480 [12.20] .559 [14.20] VIEWED TOWARD TERMINALS .014 [.36] Wiring Diagram 4 .016 2 3 2 3 .039 [1.0] 4 x .032 [0.8] 1 1 5 4 5 FORM C FORM A VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 5/26/05W