AZ9481F
16 AMP LOW PROFILE POWER RELAY
FEATURES • • • • • • • • • Quick connect and PC terminals High power switching (4000 VA) High sensitivity, 128 mW pickup Low profile (less than .55" height) SPST (1 Form A) UL Class F (155°C) standard Epoxy sealed versions available DC coils up to 48 VDC UL file E43203, TÜV R50053055
GENERAL DATA
Life Expectancy Mechanical Electrical Operate Time (typical) Minimum operations 1 x 107 1 x 105 10 A 250 VAC Res. 10 ms at nominal coil voltage 5 ms at nominal coil voltage (with no coil suppression)
CONTACTS
Arrangement Ratings Standard 1 Form A SPST (1 Form A) Resistive load: Max. switched power: 300 W, 2500 VA Max. switched current: 10 A Max. switched voltage: 250 VAC / 30 VDC Max. switch power: 300 W, 4000 VA Max. switch current: 16 A Max. switched voltage: 250 VAC / 30 VDC Standard 1 Form A 10 A at 250 VAC Res. 100k cycles [1][2] 10 A at 30 VDC Res. 100k cycles [1][2] TV-5 [1][2] High Capacity 1 Form A 16 A at 125 VAC Res. 100k cycles [1][2] 10 A at 30 VDC Res. 100k cycles [1][2] TV-5 [1][2] TÜV High Capacity 1 Form A 16 A at 250 VAC Res. 100k cycles [1][2] 8 A at 250 VAC cos phi = 0.4 100k cycles [1][2] 10 A at 30 VDC Res. 100k cycles [1][2] Silver cadmium oxide [1] or silver tin oxide [2] Gold plating available. < 100 milliohms initially (6 V, 1 A voltage drop method)
Release Time (typical)
Dielectric Strength 2500 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms contact to contact Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals 100 megohms min. at 20°C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 155°C (333°F) 0.062" DA at 10–55 Hz 10 g operational, 100g destructive P.B.T. polyester Tinned copper alloy, P.C. with quick connect tabs
Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force.
High Capacity 1 Form A
Rated Load UL
Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time
270°C (518°F) 5 seconds 80°C (176°F) 30 seconds 8 grams
Material
Resistance
Weight
COIL
Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 128 mW 1.34 W at 20°C (68°F) 13°C (23°F) at nominal coil voltage Max. 155°C (333°F)
NOTES
1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice.
12/14/05W
AZ9481F
RELAY ORDERING DATA
COIL SPECIFICATIONS SPST-NO (1 Form A)
Nominal Coil VDC 5 6 9 12 18 24 48 Must Operate VDC 4 4.8 7.2 9.6 14.4 19.2 38.4 Max. Continuous VDC 13.4 16.1 24.1 32.2 48.3 64.4 128.8 Coil Resistance ±10% 125 180 405 720 1620 2880 11520
ORDER NUMBER*
AgCdO Contacts AZ9481F–1A–5D AZ9481F–1A–6D AZ9481F–1A–9D AZ9481F–1A–12D AZ9481F–1A–18D AZ9481F–1A–24D AZ9481F–1A–48D AgSnO2 Contacts AZ9481F–1AE–5D AZ9481F–1AE–6D AZ9481F–1AE–9D AZ9481F–1AE–12D AZ9481F–1AE–18D AZ9481F–1AE–24D AZ9481F–1AE–48D
*Add suffix “E” for epoxy sealed version. Add suffix “A” for gold plated contacts.
COIL SPECIFICATIONS SPST-NO (1 Form A) - HIGH CAPACITY
Nominal Coil VDC 5 6 9 12 18 24 48 Must Operate VDC 4 4.8 7.2 9.6 14.4 19.2 38.4 Max. Continuous VDC 13.4 16.1 24.1 32.2 48.3 64.4 128.8 Coil Resistance ±10% 125 180 405 720 1620 2880 11520
ORDER NUMBER*
AgCdO Contacts AZ9481F–1AT–5D AZ9481F–1AT–6D AZ9481F–1AT–9D AZ9481F–1AT–12D AZ9481F–1AT–18D AZ9481F–1AT–24D AZ9481F–1AT–48D AgSnO2 Contacts AZ9481F–1AET–5D AZ9481F–1AET–6D AZ9481F–1AET–9D AZ9481F–1AET–12D AZ9481F–1AET–18D AZ9481F–1AET–24D AZ9481F–1AET–48D
*Add suffix “E” for epoxy sealed version. Add suffix “A” for gold plated contacts.
MECHANICAL DATA
OUTLINE DIMENSIONS PC BOARD LAYOUT
.906 MAX [23.0] .126 [3.2] .016 [0.4] .460 MAX [11.7] 0.543 MAX [13.8] .142 [3.6] 4X.020 [0.5] 0.193 [4.9] 2X.020 [0.5] 2X0.047 [1.2] .250 [6.35]
.248 [6.3] .187 [4.75] Ø0.05 [Ø1.3]
2-Ø.036 [Ø0.9]
.701 [17.8]
.039 [1.0] .071 [1.8]
.561 [14.3]
.634 [16.1]
.197 [5.0]
.807 [20.5]
.020 [0.5]
WIRING DIAGRAM
.701 [17.8]
2
BOTTOM VIEW
1.012 MAX [25.7]
.634 [16.1] .197 [5.0] .561 [14.3]
TYPE QC (SPST - NO)
Dimensions in inch with millimeters in brackets below. Tolerance:±.010”
12/14/05W