AZ955

AZ955 AZ SUBMINIATURE PC BOARD RELAY FEATURES • • • • • • • Subminiature size for high density packaging DIL pitch terminals Epoxy sealed for automatic wave soldering High sensitivity: 150 mW nominal with 84 mW pickup Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric UL / CUR file E43203 GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 10 million operations 1 x 105 at 0.5A 120 VAC Res. Standard: 3 ms at nominal coil voltage Sensitive: 5 ms at nominal coil voltage 1 ms at nominal coil voltage (with no coil suppression) Coil to contact: 3.0 pF Contact to contact: 3.0 pF At 10 mA contact current 2 ms at operate 8 ms at release CONTACTS Arrangement Ratings Light Duty SPDT (1 Form C) Bifurcated crossbar contacts Resistive load: Max. switched power: 30 W or 60 VA Max. switched current: 1 A Max. switched voltage: 60 VDC or 125 VAC UL Rating: 1 A at 30 VDC 0.3 A at 60 VDC 0.5 A at 125 VAC Silver nickel, gold clad < 100 milliohms initially Operate Time (typical) Release Time (typical) Capacitance Bounce (typical) Material Resistance Dielectric Strength 1250 Vrms coil to contact (at sea level for 1 min.) 500 Vrms between open contacts Meets FCC Part 68.302 1500 V lightning surge Meets FCC Part 68.304 1000 V dielectric Insulation Resistance 100 megohms min. at 20°C, 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage Standard: -40°C (-40°F) to 70°C (158°F) Sensitive: -40°C (-40°F) to 80°C (176°F) Both: -40°C (-40°F) to 105°C (221°F) 0.039" DA at 10–55 Hz 10 g P.B.T. polyester Tinned copper alloy 270°C (518°F) 5 seconds 30 seconds 1.8 grams COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Standard coil:113 mW Sensitive coil: 84 mW .5 W at 20°C (68°F) ambient Standard: 33°C (59°F) at nominal coil voltage Sensitive: 25°C (45°F) at nominal coil voltage Max. 105°C (221°F) Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals Temperature NOTES 1. 2. 3. 4. All values at 20°C (68°F). Relay may pull in with less than “Must Operate” value. Other coil resistances and sensitivities available upon request. Specifications subject to change without notice. Max. Solder Temp. Max. Solder Time Max. Immersion Time Weight 1/23/06W AZ955 AZ RELAY ORDERING DATA COIL SPECIFICATIONS: STANDARD COIL Nominal Coil VDC 1.5 3 5 6 9 12 24 Nominal Coil VDC 1.5 3 5 6 9 12 24 Must. Operate VDC 1.1 2.3 3.8 4.5 6.8 9.0 18.0 Must. Operate VDC 1.1 2.3 3.8 4.5 6.8 9.0 18.0 Max. Continuous VDC 2.4 4.7 7.9 9.5 14.2 19.0 37.9 Max. Continuous VDC 2.7 5.5 9.1 11.0 16.4 21.9 43.8 Coil Resistance ±10% 11.3 45.0 125 180 405 720 2880 Coil Resistance ±10% 15.0 60.0 167 240 540 960 3840 ORDER NUMBER AZ955-1C-1.5DE AZ955-1C-3DE AZ955-1C-5DE AZ955-1C-6DE AZ955-1C-9DE AZ955-1C-12DE AZ955-1C-24DE COIL SPECIFICATIONS: SENSITIVE COIL ORDER NUMBER AZ955-1C-1.5DSE AZ955-1C-3DSE AZ955-1C-5DSE AZ955-1C-6DSE AZ955-1C-9DSE AZ955-1C-12DSE AZ955-1C-24DSE MECHANICAL DATA PC BOARD LAYOUT Viewed toward terminals .300 [7.6] .472 [12.0] .291 [7.4] .385 [9.8] .100 [2.5] .033 [0.84] .045 [1.15] .200 [5.1] .020 [0.5] .100 [2.5] .300 [7.6] .138 [3.5] TYP .200 [5.1] 2xø.024 [ø0.6] 4xø.032 [ø0.8] 2xø.016 [ø0.4] WIRING DIAGRAM Viewed toward terminals 1 4x.020 [0.5] 4x.008 [0.2] 2 5 10 9 6 Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 1/23/06W