AZ956P2-15DE

AZ956P AZ MICROMINIATURE POLARIZED BISTABLE (LATCHING) RELAY FEATURES • Microminiature size: up to 50% less board area than previous generation telecom relays • Meets FCC Part 68.302 1500 V lightning surge • High dielectric and surge voltage: • Low power consumption: 36 mW pickup • Stable contact resistance for low level signal switching • Epoxy sealed for automatic wave soldering and cleaning • UL, CUR file E43203 • All plastics meet UL94 V–0, 30 min. oxygen index GENERAL DATA Life Expectancy Mechanical Electrical Minimum operations 1 x 109 2.5 x 105 at 0.4 A, 125 VAC, resistive 3 x 106 at 1.0 A, 24 VDC, resistive 1 ms at nominal coil voltage 0.9 ms at nominal coil voltage At 10 mA contact current 1 ms at set or reset 1500 Vrms contact to coil 500 Vrms between open contacts 109 ohms min. at 25°C, 500 VDC, 50% RH At nominal coil voltage -40°C (-40°F) to 70°C (158°F) -40°C (-40°F) to 105°C (221°F) Operational, 40 g, 10–200 Hz Operational, 50 g min., 11 ms Non-destructive, 150 g min., 11 ms Vapor phase: 215°C, 40 Sec. Infrared: 215°C, 40 Sec. Double wave: 260°C, 10 Sec. 80°C (176°F) 30 seconds 1.8 grams P.B.T. polyester Tinned copper alloy, P.C. CONTACTS Arrangement Ratings SPDT (1 Form C) Bifurcated crossbar contacts Resistive load: Max. switched power: 30 W or 60 VA Max. switched current: 1.0 A Max. switched voltage: 150 VDC or 125 VAC Rated Load UL Material Resistance 0.5 A at 120 VAC 1.0 A at 30 VDC Palladium nickel with gold-rhodium overlay < 50 milliohms initally (6 V, 10 mA method) Set Time (typical) Reset Time (typical) Bounce (typical) Dielectric Strength (at sea level) Insulation Resistance Ambient Temperature Operating Storage Vibration COIL (Polarized) Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 36 mW 0.5 W at 20°C (68°F) At nominal coil voltage 8°C (15°F) Max. 105°C (221°F) Shock Max. Solder Temp. Temp./Time Max. Solvent Temp. Max. Immersion Time Weight Enclosure Terminals NOTES 1. All values at 20°C (68°F). 2. Relay may set or reset in with less than “Must Operate” value. 3. Relay has fixed coil polarity. 4. Specifications subject to change without notice. 7/24/02W AZ956P AZ RELAY ORDERING DATA STANDARD SINGLE COIL Nominal Coil VDC 1.5 3 5 9 12 15 24 Nominal Coil VDC 1.5 3 5 9 12 15 Max. Operating VDC 6 13 20 35 50 50 50 Max. Operating VDC 4.25 8.55 14.75 25.6 29 29 Coil Resistance ± 10% 61 300 740 2160 4500 4500 4500 Coil Resistance ± 10% 32 130 390 1200 1500 1500 Must Operate VDC 1.13 2.25 3.75 6.75 9.00 11.3 18.00 Must Operate VDC 1.13 2.25 3.75 6.75 9.00 11.3 Order Number THT SMT Through Hole AZ956P1–1.5DE AZ956P1S–1.5DE AZ956P1–3DE AZ956P1–5DE AZ956P1S–3DE AZ956P1S–5DE AZ956P1–9DE AZ956P1S–9DE AZ956P1–12DE AZ956P1S–12DE AZ956P1–15DE AZ956P1S–15DE AZ956P1–24DE AZ956P1S–24DE STANDARD DUAL COIL Order Number THT SMT Through Hole AZ956P2–1.5DE AZ956P2S–1.5DE AZ956P2–3DE AZ956P2–5DE AZ956P2S–3DE AZ956P2S–5DE AZ956P2–9DE AZ956P2S–9DE AZ956P2–12DE AZ956P2S–12DE AZ956P2–15DE AZ956P2S–15DE MECHANICAL DATA THT SMT .006 (.15) .08 MAX (2) PC BOARD LAYOUT Viewed toward terminals PC BOARD LAYOUT Viewed toward terminals Wiring Diagram Viewed toward terminals Single Coil Latching Shown in reset Position Dual Coil Latching Shown in reset position Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 7/24/02W