AZ9571-1C-12DSE

AZ9571 SUBMINIATURE PC BOARD RELAY FEATURES • • • • Subminiature size for high density packaging Epoxy sealed for automatic wave soldering High sensitivity: 150 mW nominal with 96 mW pickup UL, CUR E43203 GENERAL DATA CONTACTS Life Expectancy Mechanical Electrical Minimum operations 10 million operations 1 x 105 at 0.5A 120 VAC Res. Operate Time (typical) 5 ms at nominal coil voltage Arrangement SPDT (1 Form C) Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) Ratings Resistive load: Max. switched power: 30 W or 62.5 VA Max. switched current: 1 A Max. switched voltage: 60 VDC or 125 VAC UL Rating: 1 A at 30 VDC 0.3 A at 60 VDC 0.5 A at 125 VAC Capacitance Coil to contact: 7.0 pF Contact to contact: 7.0 pF Bounce (typical) At 10 mA contact current 2 ms at operate 8 ms at release Material Silver gold clad Resistance < 100 milliohms initially (6 V 1 A method) COIL Power At Pickup Voltage (typical) Standard coil:128 mW Sensitive coil: 96 mW Max. Continuous Dissipation .5 W at 20°C (68°F) ambient Temperature Rise Standard: 33°C (59°F) at nominal coil voltage Sensitive: 25°C (45°F) at nominal coil voltage Temperature Insulation Resistance 100 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 10% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 70°C (158°F) Storage -40°C (-40°F) to 105°C (221°F) Vibration 3.3 mm DA at 10–55 Hz Shock 10 g Functional, 100g destructive Enclosure P.E.T. polyester Terminals Tinned copper alloy Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Immersion Time 30 seconds Weight 2.2 grams Max. 105°C (221°F) NOTES 1. 2. 3. 4. Dielectric Strength 1000 Vrms coil to contact (at sea level for 1 min.) 400 Vrms between open contacts All values at 20°C (68°F). Relay may pull in with less than “Must Operate” value. Other coil resistances and sensitivities available upon request. Specifications subject to change without notice. 2/15/13 AZ9571 RELAY ORDERING DATA COIL SPECIFICATIONS: STANDARD COIL Nominal Coil VDC 3 Must. Operate VDC 2.4 5 4.0 6 4.8 9 7.2 12 9.6 24 19.2 Max. Continuous VDC 4.5 7.5 Coil Resistance ±10% 45.0 ORDER NUMBER AZ9571-1C-3DE 125 AZ9571-1C-5DE 9.0 180 AZ9571-1C-6DE 13.5 405 AZ9571-1C-9DE 18 720 AZ9571-1C-12DE 36 2880 AZ9571-1C-24DE COIL SPECIFICATIONS: SENSITIVE COIL Nominal Coil VDC 3 Must. Operate VDC 2.4 Max. Continuous VDC 6.0 Coil Resistance ±10% 60.0 ORDER NUMBER AZ9571-1C-3DSE 5 4.0 10.0 167 AZ9571-1C-5DSE 6 4.8 12.0 240 AZ9571-1C-6DSE 9 7.2 18.0 540 AZ9571-1C-9DSE 12 9.6 24.0 960 AZ9571-1C-12DSE 24 19.2 48.0 3840 AZ9571-1C-24DSE MECHANICAL DATA Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 2/15/13 This specification provides an overview of the most significant part features. Any individual applications and operating conditions are not taken into consideration. It is recommended to test the product under application conditions. Responsibility for the application remains with the customer. Proper operation and service life cannot be guaranteed if the part is operated outside the specified limits.