AZ962-1C-6DH

AZ962 10 AMP MINIATURE PC BOARD RELAY FEATURES • • • • • Extremely low cost High CTI (300) version available Class F insulation (155°C) standard UL, CUR file E44211 VDE file 40004578 GENERAL DATA CONTACTS Arrangement Ratings SPST (1 Form A) SPDT (1 Form C) Form A and C Max. switched power: 2500 VA Max. switched current: 10 A AC Max. switched voltage: 415 VAC 1 Form A - Standard and High CTI 10 A at 250 VAC, General Purpose, 20k cycles 6 A at 415 VAC, Resistive 1/10 HP at 120 VAC 1/4 HP at 240 VAC 1 Form C - Standard and High CTI 10 A (N.O.), 5 A (N.C.) at 120 VAC, General Purpose, 25k cycles VDE Material Resistance 1 Form C - Standard and High CTI at 85°C 10 A (N.O.), 3 A (N.C.) at 250 VAC, 30k cycles Silver nickel < 100 milliohms initially (24 V, 1 A method) Life Expectancy Mechanical Electrical 5 x 106 2.5 x 104 at 10 A 250 VAC Res. Operate Time (Typical) 15 ms Release Time (Typical) 10 ms (with no coil suppression) Dielectric Strength 2500 Vrms contact to coil (at sea level for 1 min.) 1000 Vrms across contacts Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock Enclosure Terminals 100 megohms min. at 500 VDC, 50% RH Greater than 10% of nominal coil voltage At nominal coil voltage -40°C(-40°F) to 85°C (185°F) High CTI -40°C(-40°F) to 85°C (185°F) Standard -40°C(-40°F) to 105°C (221°F) High CTI -40°C(-40°F) to 155°C (311°F) Standard >4g at 30-400 Hz >10g (functional) >30g (destructive) P.E.T. polyester Tinned copper alloy, P.C. 260°C (500°F) 5 seconds 5.4 g UL/CUR COIL Power At Pickup Voltage Max Continuous Dissipation Temperature Rise Temperature 200 mW 1.8 W at 20°C (68°F) Class F 1.2 W at 20°C (68°F) Class A 33°C (59.4°F) at nominal coil voltage Max. 155°C (311°F) Class F Max. 105°C (221°F) Class A Max. Solder Temp. Max. Solder Time Weight NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Unsealed relays should not be dip cleaned. 4. Specifications subject to change without notice. 04/18/05W AZ962 RELAY ORDERING DATA STANDARD RELAYS – CLASS F INSULATION, CTI 250 COIL SPECIFICATIONS Nominal Coil VDC 6 12 24 Max. Continuous VDC 13.5 27.0 54.0 Coil Resistance ±10% 100 400 1600 Must Operate VDC 4.5 9.0 18.0 ORDER NUMBER 1 Form A AZ962–1A–6DF AZ962–1A–12DF AZ962–1A–24DF 1 Form C AZ962–1C–6DF AZ962–1C–12DF AZ962–1C–24DF HIGH CTI RELAYS – CLASS A INSULATION, CTI 300 COIL SPECIFICATIONS Nominal Coil VDC 6 12 24 Max. Continuous VDC 11.0 22.0 44.0 Coil Resistance ±10% 100 400 1600 Must Operate VDC 4.5 9.0 18.0 ORDER NUMBER 1 Form A AZ962–1A–6DH AZ962–1A–12DH AZ962–1A–24DH 1 Form C AZ962–1C–6DH AZ962–1C–12DH AZ962–1C–24DH MECHANICAL DATA .60 Max [15.25] .60 Max [15.25] .797 Max [20.25] .146 [3.7] .197 [5.0] .197 [5.0] .098 [2.5] .0 4 9 [1.25] Ø.051 [Ø1.3] A1 .246 [6.25] .197 [5.0] 11 12 A2 14 .295 [7.5] Wiring Diagram Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 04/18/05W