AZ980-1C-24D

AZ980 80 AMP MINI-ISO AUTOMOTIVE RELAY FEATURES • • • • 80 Amp contact rating – “Super ISO” High momentary carry current (500 A) High operating temperature (85°C) SPST - N.O. (1 Form A), SPDT (1 Form C) SPST - N.C. (1 Form B) • Quick connect terminals • ISO/TS 16949, ISO14001 • Tested in accordance with SAEJ2544 CONTACTS Arrangement Ratings SPST - N.O. (1 Form A), SPST - N.C. (1 Form B), SPDT (1 Form C) Resistive load: Max. switched power: 1120 W (SPST) Form A 840 W (N.O.) Form C 840 W (N.C.) Form C, Form B Max. switched current: 80 A (SPST) Form A 60 A (N.O.) Form C 60 A (N.C.) Form C, Form B Max. switched voltage: 30 VDC GENERAL DATA Life Expectancy Mechanical Electrical Operate Time (typical) Release Time (typical) Minimum operations 1 x 107 1 x 105 at 80 A 14 VDC Res. 7 ms at nominal coil voltage 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 500 Vrms coil to contact (at sea level for 1 min.) 500 Vrms contact to contact Insulation Resistance 100 megohms min. at 500 VDC, 20°C 50% RH Greater than 10% of nominal coil voltage -40°C (-40°F) to 85°C (185°F) -40°C (-40°F) to 105°C (211°F) 0.062" DA at 10-55 Hz 10 g P.B.T. polyester Copper alloy Quick Connect Note: Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force. Material Resistance Silver tin oxide < 50 milliohms initially (24 V, 1 A voltage drop method) Dropout Ambient Temperature Operating Storage COIL Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature 0.76 W 3.0 W at 20°C (68°F) 56°C (101°F) at nominal coil voltage Max. 155°C (311°F) Vibration Shock Enclosure Terminals Weight 46 grams NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 5/22/07W AZ980 RELAY ORDERING DATA COIL SPECIFICATIONS ORDER NUMBER* Nominal Coil Must Operate Max. Continuous Coil Resistance SPST SPDT VDC VDC VDC ± 10% 6 3.9 7.8 20 AZ980–1A–6D AZ980–1C–6D 12 7.8 19.0 90 AZ980–1A–12D AZ980–1C–12D 24 15.6 37.9 360 AZ980–1A–24D AZ980–1C–24D * For SPST (N.C.) (1 Form B) relay, substitute “-1B” for “-1A”. Add suffix “R” for resistor in parallel with coil. Resistor values: 6V: 180 ohms, 12V: 680 ohms, 24V: 2700 ohms. Add suffix “D” for diode across coil (anode (+) on terminal #86). Add suffix “E” for epoxy sealed version. HARDWARE ORDERING DATA DESCRIPTION Socket ORDER NUMBER ST980 MECHANICAL DATA O u tlin e D im e n s io n s 1.142 Max [29 ] 1.142 Max [29] W irin g D ia g ra m s SPDT 30 30 85 87A 86 1.043 Max [26.5] .7 0 5 [1 7 .9 ] 85 87A 86 .3 1 1 [7 .9 ] 87 87 .3 2 7 [8 .3 ] S P S T (N .O .) 3 x .5 9 8 [1 5 .2 ] 2 x .4 4 1 [1 1 .2 ] 85 30 .6 6 1 [1 6 .8 ] 86 2 x .0 3 1 [.8 ] 3 x .0 4 7 [1 .2 ] 3 x .3 7 4 [9 .5 ] 2 x .2 4 8 [6 .3 ] 87 S o c k e t, S P S T - S T 9 8 0 .292 [7.43] .761 [19.33] .206 [5.23] 1.265 [32.13] .697 [17.72] 1.147 [29.12] .319 [8.12] .632 [16.05] .729 [18.53] .967 [24.56] .903 [22.94] Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 5/22/07W