AZ10EL07D

ARIZONA MICROTEK, INC. AZ10EL07 AZ100EL07 ECL/PECL 2-Input XOR/XNOR FEATURES • • • • 260ps Propagation Delay High Bandwidth Output Transitions 75kΩ Internal Input Pulldown Resistors Direct Replacement for ON Semiconductor MC10EL07 & MC100EL07 PACKAGE SOIC 8 SOIC 8 TSSOP 8 TSSOP 8 1 2 PACKAGE AVAILABILITY PART NUMBER AZ10EL07D AZ100EL07D AZ10EL07T AZ100EL07T MARKING AZM10EL07 AZM100EL07 AZTEL07 AZHEL07 NOTES 1,2 1,2 1,2 1,2 Add R1 at end of part number for 7 inch (1K parts), R2 for 13 inch (2.5K parts) Tape & Reel. Date Code “YWW” on underside of part. DESCRIPTION The AZ10/100EL07 is a 2-input XOR/XNOR gate. The device is functionally equivalent to the E107 device with higher performance capabilities. With propagation delays and output transition times significantly faster than the E107, the EL07 is ideally suited for those applications that require the ultimate in AC performance. NOTE: Specifications in ECL/PECL tables are valid when thermal equilibrium is established. LOGIC DIAGRAM AND PINOUT ASSIGNMENT NC PIN DESCRIPTION PIN D0, D1 Q, Q ¯ VCC VEE NC FUNCTION Data Inputs Data Outputs Positive Supply Negative Supply No Connect 1 8 VCC D0 2 7 Q D1 3 6 Q NC 4 5 VEE 1630 S. STAPLEY DR., SUITE 127 • MESA, ARIZONA 85204 • USA • (480) 962-5881 • FAX (480) 890-2541 www.azmicrotek.com AZ10EL07 AZ100EL07 Absolute Maximum Ratings are those values beyond which device life may be impaired. Symbol VCC VI VEE VI IOUT TA TSTG Characteristic PECL Power Supply (VEE = 0V) PECL Input Voltage (VEE = 0V) ECL Power Supply (VCC = 0V) ECL Input Voltage (VCC = 0V) Output Current --- Continuous --- Surge Operating Temperature Range Storage Temperature Range Rating 0 to +8.0 0 to +6.0 -8.0 to 0 -6.0 to 0 50 100 -40 to +85 -65 to +150 Unit Vdc Vdc Vdc Vdc mA °C °C 10K ECL DC Characteristics (VEE = -4.75V to -5.5V, VCC = GND) Symbol VOH VOL VIH VIL IIH IIL IEE 1. Characteristic 1 Output HIGH Voltage Output LOW Voltage1 Input HIGH Voltage Input LOW Voltage Input HIGH Current D0 250 D1 150 Input LOW Current 0.5 Power Supply Current 14 17 Each output is terminated through a 50Ω resistor to VCC – 2V. Min -1080 -1950 -1230 -1950 -40°C Typ Max -890 -1650 -890 -1500 Min -1020 -1950 -1170 -1950 0° C Typ Max -840 -1630 -840 -1480 250 150 Min -980 -1950 -1130 -1950 25° C Typ Max -810 -1630 -810 -1480 250 150 Min -910 -1950 -1060 -1950 85° C Typ Max -720 -1595 -720 -1445 250 150 Unit mV mV mV mV μA μA mA 0.5 14 17 0.5 14 17 0.5 14 17 10K PECL DC Characteristics (VEE = GND, VCC = +5.0V) Symbol VOH VOL VIH VIL IIH IIL IEE 1. 2. Characteristic 1,2 Output HIGH Voltage Output LOW Voltage1,2 Input HIGH Voltage1 Input LOW Voltage1 Input HIGH Current D0 250 250 D1 150 150 Input LOW Current 0.5 0.5 0.5 Power Supply Current 14 17 14 17 For supply voltages other that 5.0V, use the ECL table values and ADD supply voltage value. Each output is terminated through a 50Ω resistor to VCC – 2V. Min 3920 3050 3770 3050 -40°C Typ Max 4110 3350 4110 3500 Min 3980 3050 3830 3050 0° C Typ Max 4160 3370 4160 3520 Min 4020 3050 3870 3050 25°C Typ Max 4190 3370 4190 3520 250 150 Min 4090 3050 3940 3050 85°C Typ Max 4280 3405 4280 3555 250 150 Unit mV mV mV mV μA μA mA 0.5 14 17 14 17 100K ECL DC Characteristics (VEE = -4.2V to -5.5V, VCC = GND) Symbol VOH VOL VIH VIL IIH IIL IEE 1. Characteristic 1 Output HIGH Voltage Output LOW Voltage1 Input HIGH Voltage Input LOW Voltage Input HIGH Current D0 250 D1 150 Input LOW Current 0.5 Power Supply Current 14 17 Each output is terminated through a 50Ω resistor to VCC – 2V. Min -1085 -1830 -1165 -1810 -40°C Typ -1005 -1695 Max -880 -1555 -880 -1475 Min -1025 -1810 -1165 -1810 0° C Typ -955 -1705 Max -880 -1620 -880 -1475 250 150 Min -1025 -1810 -1165 -1810 25° C Typ -955 -1705 Max -880 -1620 -880 -1475 250 150 Min -1025 -1810 -1165 -1810 85° C Typ -955 -1705 Max -880 -1620 -880 -1475 250 150 Unit mV mV mV mV μA μA mA 0.5 14 17 0.5 14 17 0.5 16 20 November 2006 * REV - 3 www.azmicrotek.com 2 AZ10EL07 AZ100EL07 100K PECL DC Characteristics (VEE = GND, VCC = +5.0V) Symbol VOH VOL VIH VIL IIH IIL IEE 1. 2. Characteristic 1,2 Output HIGH Voltage Output LOW Voltage1,2 Input HIGH Voltage1 Input LOW Voltage1 Input HIGH Current D0 250 250 D1 150 150 Input LOW Current 0.5 0.5 0.5 Power Supply Current 14 17 14 17 For supply voltages other that 5.0V, use the ECL table values and ADD supply voltage value. Each output is terminated through a 50Ω resistor to VCC – 2V. Min 3915 3170 3835 3190 -40°C Typ 3995 3305 Max 4120 3445 4120 3525 Min 3975 3190 3835 3190 0° C Typ 4045 3295 Max 4120 3380 4120 3525 Min 3975 3190 3835 3190 25°C Typ 4045 3295 Max 4120 3380 4120 3525 250 150 Min 3975 3190 3835 3190 85°C Typ 4045 3295 Max 4120 3380 4120 3525 250 150 Unit mV mV mV mV μA μA mA 0.5 14 17 16 20 AC Characteristics (VEE =10E(-4.75V to -5.5V), 100E(-4.2V to -5.5V); VCC=GND or VEE =GND, VCC=10E(+4.75V to +5.5V), 100E(+4.2V to +5.5V)) Symbol tPLH / tPHL tr / t f Characteristic Propagation Delay to Output Rise/Fall Time 20 – 80% Min 90 100 -40°C Typ 250 Max 435 350 Min 140 100 0° C Typ 250 Max 385 350 Min 150 100 25° C Typ 260 Max 395 350 Min 170 100 85° C Typ 280 Max 415 350 Unit ps ps November 2006 * REV - 3 www.azmicrotek.com 3 AZ10EL07 AZ100EL07 1. PACKAGE DIAGRAM SOIC 8 NOTES: 1. DIMENSIONS D AND E DO NOT INCLUDE MOLD PROTRUSION. 2. MAXIMUM MOLD PROTRUSION FOR D IS 0.15mm. 3. MAXIMUM MOLD PROTRUSION FOR E IS 0.25mm. DIM A A1 A2 A3 bp c D E e HE L Lp Q v w y Z θ MILLIMETERS MIN MAX 1.75 0.10 0.25 1.25 1.45 0.25 0.36 0.49 0.19 0.25 4.8 5.0 3.8 4.0 1.27 5.80 6.20 1.05 0.40 1.00 0.60 0.70 0.25 0.25 0.10 0.30 0.70 8O 0O INCHES MIN MAX 0.069 0.004 0.010 0.049 0.057 0.01 0.014 0.019 0.0075 0.0100 0.19 0.20 0.15 0.16 0.050 0.228 0.244 0.041 0.016 0.039 0.024 0.028 0.01 0.01 0.004 0.012 0.028 0O 8O November 2006 * REV - 3 www.azmicrotek.com 4 AZ10EL07 AZ100EL07 PACKAGE DIAGRAM TSSOP 8 NOTES: 1. DIMENSIONS D AND E DO NOT INCLUDE MOLD PROTRUSION. 2. MAXIMUM MOLD PROTRUSION FOR D IS 0.15mm. 3. MAXIMUM MOLD PROTRUSION FOR E IS 0.25mm. DIM A A1 A2 A3 bp c D E e HE L Lp v w y Z θ MILLIMETERS MIN MAX 1.10 0.05 0.15 0.80 0.95 0.25 0.25 0.45 0.15 0.28 2.90 3.10 2.90 3.10 0.65 4.70 5.10 0.94 0.40 0.70 0.10 0.10 0.10 0.35 0.70 6O 0O November 2006 * REV - 3 www.azmicrotek.com 5 AZ10EL07 AZ100EL07 Arizona Microtek, Inc. reserves the right to change circuitry and specifications at any time without prior notice. Arizona Microtek, Inc. makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Arizona Microtek, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Arizona Microtek, Inc. does not convey any license rights nor the rights of others. Arizona Microtek, Inc. products are not designed, intended or authorized for use as components in systems intended to support or sustain life, or for any other application in which the failure of the Arizona Microtek, Inc. product could create a situation where personal injury or death may occur. Should Buyer purchase or use Arizona Microtek, Inc. products for any such unintended or unauthorized application, Buyer shall indemnify and hold Arizona Microtek, Inc. and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Arizona Microtek, Inc. was negligent regarding the design or manufacture of the part. November 2006 * REV - 3 www.azmicrotek.com 6