74LVC1G126QW5-7

74LVC1G126Q SINGLE BUFFER GATE WITH 3-STATE OUTPUT Description Pin Assignments The 74LVC1G126Q is an automotive-compliant, single, non-inverting buffer/bus driver with a 3-state output. The output enters a highimpedance state when a LOW level is applied to the output enable (OE) pin. The device is designed for operation with a power supply range of 1.65V to 5.5V. The inputs are tolerant to 5.5V, allowing this device to be used in a mixed-voltage environment. The device is fully specified for partial power down applications using IOFF. The IOFF ( Top View ) OE 1 5 Vcc A 2 circuitry disables the output preventing damaging current backflow when the device is powered down. 4 Y GND 3 SOT 25 / SOT353 Applications Features • • • • • • • • • Grade 1 Ambient Temperature Operation: -40°C to +125°C Wide Supply Voltage Range from 1.65V to 5.5V ±24mA Output Drive at 3.3V CMOS Low Power Consumption IOFF Supports Partial-Power-Down Mode Operation • • Inputs Accept up to 5.5V ESD Protection Tested per AEC-Q100  Exceeds 2000V Human Body Model (AEC-Q100-002)  Exceeds 1000V Charged Device Model (AEC-Q100-011) Latch-Up Exceeds 100mA (AEC-Q100-004) Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) The 74LVC1G126Q is suitable for automotive applications requiring specific change control; this part is AEC-Q100 qualified, PPAP capable, and manufactured in IATF 16949 certified facilities. https://www.diodes.com/quality/product-definitions/ • • • • Notes: Voltage Level Shifting General Purpose Logic Power Down Signal Isolation Wide Array of Products, such as:  Automotive Applications within Grade 1 Temperature Range  Industrial Computing/Controls/Automation  High Reliability Networking/Communications  Industrial/Agricultural Equipment 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain