74LVC573AQ20-13

74LVC573A OCTAL TRANSPARENT D-TYPE LATCH WITH 3 STATE OUTPUTS A Pin Assignments The inputs are tolerant to 5.5V allowing this device to be used in a mixed voltage environment. The device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output preventing damaging current backflow when the device is powered down. Features   Supply Voltage Range from 1.65V to 3.6V Sinks or Sources 24mA at VCC = 3V   CMOS Low Power Consumption IOFF Supports Partial-Power Down Operation   Inputs or Outputs Accept Up to 5.5V Inputs Can Be Driven by 3.3V or 5V Allowing for Mixed Voltage Applications Schmitt Trigger Action at All Inputs Typical VOLP (Quiet Output Ground Bounce) Less than 0.8V with VCC = 3.3V and TA = +25°C Typical VOHV (Quiet Output Dynamic VOH) Greater than 2.0V with VCC = 3.3V and TA = +25°C       Vcc D1 2 19 Q1 D2 3 18 Q2 D3 4 17 Q3 D4 5 16 Q4 D4 D5 6 15 Q5 7 14 Q6 D7 8 13 Q7 D8 9 12 Q8 10 11 LE GND TSSOP-20 2 19 Q1 D2 D3 3 18 Q2 4 17 Q3 5 16 Q4 D5 6 15 Q5 D6 7 14 Q6 D7 8 13 Q7 D8 9 12 Q8 11 D6 D1 OE 20 Vcc 1 1 OE 20 (Top Transparent View ) terminal index 1 area 10 These devices feature inputs and outputs on opposite sides of the package that facilitate printed circuit board layout. The device is designed for operation with a power supply range of 1.65V to 3.6V. (Top View ) LE The 74LVC573A provides eight transparent D-type latches. While the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the logic levels set up at the D inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the highimpedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components. OE does not affect the internal operations of the latches. Old data can be retained or new data can be entered while the outputs are in the high-impedance state. GND NEW PRODUCT Description V-QFN4525-20 Applications     General Purpose Logic Bus Driving Power Down Signal Isolation Wide Array of Products such as:  PCs, Notebooks, Netbooks, Ultrabooks  Networking Computer Peripherals, Hard Drives, CD/DVD ROM  TV, DVD, DVR, Set Top Box ESD Protection Tested per JESD 22  Exceeds 200-V Machine Model (A115)  Exceeds 2000-V Human Body Model (A114)  Exceeds 1000-V Charged Device Model (C101) Latch-Up Exceeds 250mA per JESD 78, Class I All devices are:  Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)  Halogen and Antimony Free. “Green” Device (Note 3) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen and Antimony free, "Green" and Lead-Free. 3. Halogen and Antimony free "Green” products are defined as those which contain