74LVCH245AT20-13

74LVCH245A OCTAL BUS TRANSCEIVER WITH BUS HOLD / 3 STATE OUTPUTS Description Pin Assignments The 74LVCH245A is an octal transceiver designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) pin can be used to disable the device so the buses effectively are NEW PRODUCT isolated. The device is designed for operation with a power supply range of 1.65V to 3.6V. The inputs are tolerant to 5.5V allowing this device to be used in a mixed voltage environment. The device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output preventing damaging current backflow when the device is powered down. Bus hold circuitry holds unused or undriven inputs at a high or low logic state. The use of external pull-up or pull down resistors is not recommended. Applications • General Purpose Logic Features • Bus Driving • • Supply Voltage Range from 1.65V to 3.6V Sinks or Sources 24ma at VCC = 3V • Power Down Signal Isolation • • • CMOS Low Power Consumption IOFF Supports Partial Power Down Operation • Inputs or Outputs Accept Up to 5.5V • Inputs Can Be Driven by 3.3V or 5V Allowing for Mixed Voltage Wide array of products such as: ƒ ƒ PCs, Notebooks, Netbooks, Ultrabooks Networking Computer Peripherals, Hard Drives, CD/DVD ROM ƒ TV, DVD, DVR, Set Top Box Applications • • Schmitt Trigger Action at All Inputs Typical VOLP (Quiet Output Ground Bounce) Less Than 0.8V with VCC = 3.3V and TA = +25°C • Typical VOHV (Quiet Output dynamic VOH) Greater than 2.0V with VCC = 3.3V and TA = +25°C • • • ESD Protection Tested per JESD 22 ƒ Exceeds 200-V Machine Model (A115) ƒ Exceeds 2000-V Human Body Model (A114) ƒ Exceeds 1000-V Charged Device Model (C101) Latch-Up Exceeds 250mA per JESD 78, Class I All devices are: ƒ Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2) ƒ Halogen and Antimony Free. “Green” Device (Note 3) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen and Antimony free, "Green" and Lead-Free. 3. Halogen and Antimony free "Green” products are defined as those which contain