AH1895-Z-7

AH1895 MEDIUM SENSITIVITY MICROPOWER OMNIPLOAR HALL-EFFECT SWITCH Description Pin Assignments The AH1895 is a medium sensitivity micropower Omnipolar Hall effect (Top View) switch IC with internal pull up and pull down capability. Designed for portable and battery powered equipment such as cellular phones and portable PCs to home appliances and industrial applications, the average supply current is only 4.3uA at 1.85V. To support portable equipment the AH1895 can operate over the supply range of 1.6V to X1-DFN1216-4 3.6V and uses a hibernating clocking system to minimize the power consumption. To minimize PCB space the AH1895 is available in (Top View) NEW PRODUCT small low profile X1-DFN1216-4 and SOT553 packages. The output is activated with either a north or south pole of sufficient magnetic field strength. When the magnetic flux density (B) perpendicular to the package is larger than operate point (Bop), the output will be turned on (pulled low) and held until B is lower than SOT553 release point (Brp). The output will remain off when there is no magnetic field. Features  Omnipolar Operation (North or South pole)  Supply Voltage of 1.6V to 3.6V  Medium Sensitivity  Micropower Operation  Chopper Stabilized Design Provides:  Superior Temperature Stability  Minimal Switch Point Drift  Enhanced Immunity to Physical Stress  No External Pull-up Resistors Required  Good RF Noise Immunity  -40°C to +85°C Operating Temperature  High ESD capability of 8kV (Human Body Model) Applications Open and Close Detect for Cellular Phones  Holster or cover detect for cellular phones and Tablet PCs  Cover or Display Switches in Portable PCs  Digital Still, Video Cameras and Handheld Gaming Consoles  Door, Lids and Tray Position Switches  Level, Proximity and Position Switches  Contact-Less Switches in Home Appliances and Industrial Applications  Small Low Profile X1-DFN1216-4 and SOT553 Packages  Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)  Halogen and Antimony Free. “Green” Device (Note 3) Notes:  1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain