AH266K-PG-B-B

  AH266 Green HIGH VOLTAGE HALL EFFECT LATCH Description Pin Assignments AH266 is an integrated Hall sensor with output drivers designed for electronic commutation of brush-less DC motor applications. The device includes an on-chip Hall voltage generator for magnetic sensing, a comparator that amplifies the Hall voltage, a Schmitt trigger to provide switching hysteresis for noise rejection, and complementary Darlington open-collector drivers for sinking large current loads. An internal band-gap regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide operating supply range. ( Top View ) 266 If a magnetic flux density (B) is larger than operation point (Bop), DO will turn on (low) and DOB will turn off (high). The output state is latched prior to reaching release point (Brp). If B< Brp, DO will turn off and DOB will turn on. AH266 is rated for operation over temperature range from -20°C to +85°C and voltage range from 4V to 28V. The devices are available in low cost die forms or rugged 4 pin SIP packages. 1 2 3 4 SIP-4 Features Applications               On-Chip Hall Plate Operating Voltage: 4V to 28V Output Current: 400mA (Continuous, +25°C) Reverse Protection Diode Only for Chip Reverse Power Connecting (Note 1) Output Protection Zener Breakdown VZ = 62V (Typ.) Lead Free package: SIP-4 SIP-4: Available in “Green” Molding Compound (No Br, Sb) RoHS Compliant (Note 2) Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Notes: Dual-Coil Brushless DC Motor Dual-Coil Brushless DC Fan Revolution Counting Speed Measurement 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain