AL1692-10ES7-13

AL1692-10E DIMMABLE LED DRIVER Description Pin Assignments NEW PRODUCT The AL1692-10E is a high performance, high power factor, high efficiency, and high current precision buck-boost and flyback dimmable LED driver for triac dimmable LED lamp applications. The AL1692-10E topology provides an accurate output current over wide line and load regulation. The wide switching frequency operates at boundary conduction mode (BCM) to ease EMI/EMC design and testing to meet the latest regulatory standards. The AL1692-10E LED driver integrates a 700V/1A high voltage MOSFET. It can cover both 120Vac and 230Vac triac dimmable applications with eliminating the external high voltage MOSFET and Varistor, which will reduce the system BOM cost. The AL1692-10E has the built-in thermal fold-back protection trigger point to automatically reduce output current. Other protection features enhance LED lighting system's safety and reliability. The AL1692-10E dimming curve is compliant with the NEMA SSL6 standard. The AL1692-10E applies to a wide range of dimmers, including leading edge and trailing edge dimmer, to achieve deep dimming down to 1% (Top View) 7 D 3 6 CS 4 5 FB VCC 1 RT 2 COMP GND SO-7 Applications   Mains Dimmable LED Lamps Offline LED Power Supply Driver The AL1692-10E is available in SO-7 package. Features      Tight Current Sense Tolerance : ± 3% Low Startup Current: 100µA Typical Low Operation Current: 210µA (Switching Frequency at 4kHz) Single Winding Inductor Wide Range of Dimmer Compatibility    Integration of 700V/1A MOSFET NEMA SSL6 Dimming Curve Compliant Internal Protections  Under Voltage Lockout (UVLO)  Leading-Edge Blanking (LEB)  Cycle-By-Cycle Over Current Protection (OCP)  Output Open/Short Protection (OVP/OSP)  Thermal Foldback Protection (TFP)  Over-Temperature Protection (OTP) SO-7 Package Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3)    Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain