AL5892SP-13

AL5892 OFFLINE DIMMABLE LINEAR LED DRIVER NEW PRODUCT Description Pin Assignments The AL5892 is an offline TRIAC dimmable linear LED driver with high integration of constant current control and smart bleeder operation. With the built-in 350V main power MOSFET and 500V bleeder MOSFET, the AL5892 offers users to design a TRIAC dimmable LED driver with extremely few external components and minimized system BOM cost. Because of the linear operation of the IC, the AL5892 LED driver is compliant with EMI standards without adding any EMI components. The AL5892 is optimized to work at 120VAC input mains voltage. (Top View) The AL5892 has abundant of protection features, such as LED short protection (OSP), thermal foldback protection (TFP) and over temperature shutdown protection (OTP). 1 GND 2 EP With an innovative efficiency compensation method, the AL5892 operates up to 85% efficiency with driving a single high-voltage LED chain. The AL5892 detects TRIAC dimmer and controls the smart bleeder to turn on and off, thus it offers the LED driver good dimmer compatibility with both leading edge and trailing edge dimmers. The AL5892 also converts the dimmer signal to optimize the dimming curve to be compliant with NEMA SSL7. VBUS 8 DIMD 7 COMP BLD 3 6 CS PLED 4 5 VCC SO-8EP (Type TH) Applications    LED Lamps Retro Fit TRIAC Dimming LED Power Modules The AL5892 is available in SO-8EP (Type TH) package to enhance the thermal reliability of the LED driver. Features              Integrated 350V Main MOSFET and 500V Bleeder MOSFET Low Operation Current: 300µA Tight Current Sense Tolerance: 3% Output Current Programmable up to 75mA Wide Range of Dimmer Compatibility Dimming Curve Compliant to NEMA SSL7 Internal Protections  LED Open/Short Protection (OSP)  Thermal Foldback Protection (TFP)  Over Temperature Shutdown Protection (OTP) Power Factor >0.7 Efficiency up to 85% SO-8EP (Type TH) Package Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) For automotive applications requiring specific change control (i.e. parts qualified to AEC-Q100, PPAP capable, and manufactured in IATF 16949 certified facilities), please contact us or your local Diodes representative. https://www.diodes.com/quality/product-definitions/ Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain