AL8805W5-7

AL8805 HIGH EFFICIENCY 36V 1A BUCK LED DRIVER Description Pin Assignments The AL8805 is a step-down DC/DC converter designed to drive LEDs (Top View) with a constant current. The device can drive up to 8 LEDs, depending on the forward voltage of the LEDs, in series from a voltage source of 6V to 36V. Series connection of the LEDs provides identical LED currents resulting in uniform brightness and eliminating the need for ballast resistors. The AL8805 switches at frequency up to 1MHz. This allows the use of small size external components, hence minimizing the PCB area needed. SW 1 GND 2 CTRL 3 5 VIN 4 SET Maximum output current of AL8805 is set via an external resistor connected between the VIN and SET input pins. Dimming is achieved SOT25 by applying either a DC voltage or a PWM signal at the CTRL input pin. An input voltage of 0.4V or lower at CTRL switches off the output MOSFET simplifying PWM dimming. Features Applications • LED Driving Current up to 1A • MR16 Lamps Better than 5% Accuracy • General Illumination Lamps • • High Efficiency up to 98% • Operating Input Voltage from 6V to 36V • High Switching Frequency up to 1MHz • PWM/DC Input for Dimming Control • Built-In Output Open-Circuit Protection • SOT25: Available in “Green” Molding Compound (No Br,Sb) with lead Free Finish/ RoHS Compliant ƒ Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) ƒ Halogen and Antimony Free. “Green” Device (Note 3) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain