0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
AM9789MMTR-G1

AM9789MMTR-G1

  • 厂商:

    BCDSEMI(美台)

  • 封装:

  • 描述:

    IC MOTOR DRIVER 8MSOP

  • 详情介绍
  • 数据手册
  • 价格&库存
AM9789MMTR-G1 数据手册
AM9789 SINGLE PHASE FULL-WAVE MOTOR DRIVER FOR SILENT FAN MOTOR Description Pin Assignments (Top View) The AM9789 is a low noise fan driver for driving a single-coil brushless direct current (BLDC) fans and motors. The integrated output staged uses BTL technology to minimize the audible noise and OUT2 EMI generated by the motor commutation. The AM9789 is highly integrated and includes PWM speed control, standby mode, internally generated Hall bias and a Hall signal amplifier allowing it to be used 1 8 GND VCC 2 7 OUT1 HIN+ 3 6 PWM HIN- 4 5 FG with either a Hall element or a Hall Switch. OUT2 1 10 GND NC 2 9 OUT1 HIN+ 3 8 VCC HB 4 7 PWM HIN- 5 6 FG MSOP-8 (M8 Package) To help protect the motor coil the AM9789 includes rotor lock, over MSOP-10 (MM Package) current and over temperature protection which shuts down the output drive. The device automatically re-starts when the rotor lock is Pin 1 Mark Pin 1 Mark removed or the operating conditions return to normal. A Tachometer output is provided by open-drain Frequency Generator (FG) Pin which OUT2 1 8 GND OUT2 1 10 GND NC 2 9 OUT1 HIN+ 3 8 VCC PWM allows external interface to monitor motor rotation or speed. The FG VCC output is the magnetic change frequency. HIN+ 3 6 PWM HB 4 7 HIN- 4 5 FG HIN- 5 6 2 7 OUT1 FG The AM9789 is available in the MSOP-8, MSOP-10, U-DFN3030-8 and U-DFN3030-10 packages. U-DFN3030-8 (DN8 Package) Features U-DFN3030-10 (DN Package) Applications  BTL Output Single-phase Full-wave Linear Driver  Silent Driver  Low Supply Current (Normal Operation, Less than 4mA)  Low Standby Current (PWM=0 Duty) @ Supply Current Less  Silent Fan Motors than 200μA  Speed Controllable by PWM Input Signal  Built-in Quick Start Function  Built-in Lock Protection and Auto Restart Function  Built-in Hall Bias Circuit  Built-in FG Output  Built-in Thermal Shutdown Circuit  Built-in Over Current Protection Circuit  Totally Lead-free & Fully RoHS Compliant (Note 1 & 2)  Halogen and Antimony Free. “Green” Device (Note 3) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain
AM9789MMTR-G1
物料型号:AM9789

器件简介:AM9789是一款低噪声风扇驱动器,用于驱动单线圈无刷直流(BLDC)风扇和电机。它采用BTL技术,以最小化电机换向产生的可听噪声和电磁干扰。该芯片高度集成,包括PWM速度控制、待机模式、内部生成的霍尔偏置和霍尔信号放大器,使其可以与霍尔元件或霍尔开关一起使用。

引脚分配:AM9789有MSOP-8、MSOP-10、U-DFN3030-8和U-DFN3030-10四种封装形式,具体引脚功能如下: - OUT1/OUT2:输出连接1/2 - NC:未连接 - HIN+/HIN-:霍尔输入正/负,连接到霍尔元件的正/负输出 - HB:霍尔偏置 - FG:转速输出 - PWM:PWM信号输入端 - VCC:电源 - GND:地

参数特性:包括但不限于: - 工作电流:旋转模式下2-4mA,待机模式下130-200μA - 供电电压范围:2V至10V - 工作温度范围:-40°C至+125°C - 热关断保护:典型工作温度+165°C,滞后宽度+30°C

功能详解:AM9789具备以下功能: - 电机锁检测、过流保护和过温保护,当检测到异常时会关闭输出驱动,并在条件恢复正常后自动重启 - 频率发生器(FG)引脚提供开漏输出,允许外部接口监测电机转速 - PWM输入信号控制速度 - 内置快速启动功能、锁保护和自动重启功能 - 完全无铅并符合RoHS标准

应用信息:AM9789适用于需要静音驱动的风扇电机,例如在需要低噪音环境中的设备。
AM9789MMTR-G1 价格&库存

很抱歉,暂时无法提供与“AM9789MMTR-G1”相匹配的价格&库存,您可以联系我们找货

免费人工找货