AP1122
1A LOW DROPOUT POSITIVE REGULATOR
Description
Pin Assignments
AP1122 is a low dropout positive fixed-mode regulator with
1A output current capability. The product is specifically
(Top View)
designed to provide well-regulated supply for low voltage IC
3
VIN
2
VOUT
1
GND
applications such as high-speed bus termination and low
current 1.2V logic supply. AP1122 is also well suited for other
applications such as VGA cards. AP1122 is guaranteed to
have lower than 1.3V dropout at full load current making it
ideal to provide well-regulated outputs of 1.2 output voltage
Tab is VOUT
with 2.5V input voltage supply.
SOT223-3L
Applications
•
•
(Top View)
VIN
3
PC peripheral
Communication
2
VOUT
Features
GND
1
•
•
•
•
•
•
•
•
•
1.3V maximum dropout at full load current
Fixed 1.2V± 2% output voltage
Fast transient response
Output current limiting
Built-in thermal shutdown
Good noise rejection
Packages: SOT223-3L, TO252-3L, SOT89-3L, TO263-3L
and TO220-3L
SOT89-3L, SOT223-3L and TO252-3L: Available in
“Green” Molding Compound (No Br, Sb)
Lead Free Finish/ RoHS Compliant (Note 1)
Tab is VOUT
TO252-3L/ TO263-3L
(Top View)
3
VIN
2
VOUT
1
GND
Tab is VOUT
SOT89-3L
( Top View)
3
VIN
2
VOUT
1
GND
Tab is VOUT
TO220-3L
Notes:
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at
http://www.diodes.com/products/lead_free.html.
AP1122
Document number: DS31012 Rev. 9 - 2
1 of 11
www.diodes.com
May 2010
© Diodes Incorporated
AP1122
1A LOW DROPOUT POSITIVE REGULATOR
Typical Application Circuit
2.5V
C1
100uF
VIN
VOUT
1.2V/1A
C2
100uF
GND
Tab is VOUT
Pin Descriptions
Pin Name
I/O
Pin #
Description
GND
I
1
Ground Pin
VOUT
O
2
The output of the regulator. A minimum of 10uF capacitor (0.15Ω ≤ ESR ≤ 20Ω)
must be connected from this pin to ground to insure stability.
VIN
I
3
The input pin of regulator. Typically a large storage capacitor is connected from
this pin to ground to insure that the input voltage does not sag below the
minimum dropout voltage during the load transient response.
Functional Block Diagram
V IN
3
2
V OUT
1
GND
+
+
1.2V
+
CURRENT
LIMIT
+
Thermal
Shutdown
AP1122
Document number: DS31012 Rev. 9 - 2
2 of 11
www.diodes.com
May 2010
© Diodes Incorporated
AP1122
1A LOW DROPOUT POSITIVE REGULATOR
Absolute Maximum Ratings
Symbol
VIN
TST
TMJ
Parameter
DC Supply Voltage
Storage Temperature
Maximum Junction Temperature
Rating
-0.3 to 12
-65 to +150
150
Unit
V
o
C
o
C
Recommended Operating Conditions
Symbol
IOUT
TOP
Parameter
Min
0
Output Current
Operating Junction Temperature Range
Max
1.0
125
Unit
A
o
C
Electrical Characteristics (Under Operating Conditions)
Parameter
Test Conditions
o
Output Voltage
2.5V≦VIN≦12V, IO=10mA, TA=25 C
Line Regulation
2.5V≦VIN≦12V, IO=10mA, TA=25oC
Load Regulation
Dropout Voltage
(VIN-VOUT)
Current Limit
Minimum Load Current
(Note 4)
Thermal Regulation
Ripple Rejection
Temperature Stability
VIN=2.5V~12V, 10mA
很抱歉,暂时无法提供与“AP1122EG-13”相匹配的价格&库存,您可以联系我们找货
免费人工找货