AP2822CKBTR-G1

NOT RECOMMENDED FOR NEW DESIGN NO ALTERNATE PART AP2822 0.5A to 2.0A HIGH-SIDE POWER DISTRIBUTION SWITCHES Description Pin Assignments The AP2822 is an integrated high-side power switch that consists of NChannel MOSFET, charge pump, over current & temperature and other related protection circuits. The switch’s low RDS(ON), 85mΩ is designed (Top View) to meet USB voltage drop requirements. The IC includes soft-start to limit inrush current, over-current protection, load short protection with fold-back, and thermal shutdown to avoid switch failure during hot plug-in. Under voltage lockout (UVLO) function is used to ensure the device remain off unless there is a valid input voltage present. A FLAG output is available to indicate fault conditions to the local USB controller. FLAG 1 GND 2 EN 3 (Top View) 5 4 VOUT VIN (SOT-23-5/ K Package) EN 1 GND 2 FLAG 3 5 VOUT 4 VIN (SOT-23-5/ KA Package) The AP2822 is available in the standard package of SOT-23-5. (Top View) Features  VOUT 1 GND 2 VIN 3 (Top View) 5 VOUT VOUT 1 GND 2 FLAG 3 5 VIN 4 EN Low MOSFET On Resistance: 85mΩ  Compliant to USB Specifications  Available 4 Versions of Continuous Load: 0.5A/1.0A/1.5A/2.0A  Logic Level Enable Pin: Available with Active-high or Active-low Version  Operating Voltage Range: 2.7V to 5.5V  Low Supply Current: 68µA (Typ.)  Low Shutdown Current: 1.0µA (Max)  Under-voltage Lockout Applications  Soft Start-up   USB Power Management Over-current Protection   USB Bus/Self Powered Hubs Over Temperature Protection   Hot-plug Power Supplies Load Short Protection with Fold-back   Battery-charger Circuits No Reverse Current When Power Off   Notebooks, Motherboard PCs Deglitched FLAG Output with Open Drain  With Output Shutdown Pull-low Resistor 4 EN (SOT-23-5/ KB Package) (SOT-23-5/ KE Package) (For Auto-discharge) (AP2822A/AP2822B/AP2822C/AP2822D/AP2822E/AP2822F/AP 2822G/AP2822H)  Without Output Shutdown Pull-low Resistor (For No Auto-discharge) (AP2822AN/AP2822BN/AP2822CN/AP2822DN/AP2822EN/AP2 822FN/AP2822GN/AP2822HN)  Totally Lead-free & Fully RoHS Compliant (Notes 1 & 2)  Halogen and Antimony Free. “Green” Device (Note 3) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain