AP3402KTTR-G1

AP3402 1.0MHZ, 2A STEP-DOWN DC-DC BUCK CONVERTER Description Pin Assignments The AP3402 is a 2A step-down DC-DC converter. At heavy load, the constant frequency PWM control performs excellent stability and transient response. No external compensation components are required. (Top View) Pin 1 Mark The AP3402 supports a range of input voltages from 2.7V to 5.5V, allowing the use of a single Li+/Li- polymer cell, multiple Alkaline/NiMH cell, and other standard power sources. The output voltage is adjustable from 0.6V to the input voltage. The AP3402 employs internal power switch and synchronous rectifier to minimize external part count and realize high efficiency. During shutdown, the input is disconnected from the output and the shutdown current is less than 1μA. Other key features include over-temperature and short circuit protection, and under-voltage lockout to prevent deep battery discharge. EN 1 6 FB GND 2 5 PG LX 3 4 VIN TSOT26 The AP3402 delivers 2A maximum output current while consuming only 90μA of no-load quiescent current. Ultra-low RDS(ON) integrated MOSFETs and 100% duty cycle operation make the AP3402 an ideal choice for high output voltage, high current applications which require a low dropout threshold. The AP3402 is available in TSOT26 package. Features   Output Current: Up to 2A Output Voltage: 0.6V to VIN               Input Voltage: 2.7V to 5.5V Peak Efficiency Up to 95% 90μA (Typ) No Load Quiescent Current Shutdown Current: