AP3792S-13

AP3781 PRIMARY SIDE REGULATED SWITCHING MODE POWER SUPPLY CONTROLLER Description Pin Assignments The AP3781 is a high performance AC/DC power supply controller for battery charger and adapter applications. The controller regulates the output voltage and current in the primary side by Pulse Frequency Modulation in Discontinuous Conduction Mode (DCM). (Top View) The AP3781 operates in Pulse Frequency Modulation (PFM) mode and peak current Amplitude Modulation (AM) mode to form a fine tune frequency curve within the whole power range. Therefore, AP3781 can achieve high average efficiency and improve audible noise. GND 1 8 NC FB 2 7 OUT The AP3781 provides comprehensive protections without additional circuitry. It contains VCC over voltage protection, output over voltage VCC 3 6 NC protection, output under voltage protection, output short circuit protection, cycle-by-cycle current limit, open loop protection, external OTP and internal OTP, etc. CS 4 5 OTP The AP3781 is packaged in SO-8. SO-8 Features Applications                 Primary Side Control for Eliminating Opto-Coupler 75mW No-Load Input Power Flyback Topology in DCM Operation External Adjustable Over Temperature Protection Fixed Internal Cable Compensation: 3% External Cable Compensation: 3% to 8% Multiple Segment AM/PFM Control Mode to Improve Audio Noise and Efficiency Ultra Low Under Voltage Protection, Support Wide Operating Voltage for Power Tool Motor Drive Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) For automotive applications requiring specific change control (i.e. parts qualified to AEC-Q100/101/200, PPAP capable, and manufactured in IATF 16949 certified facilities), please contact us or your local Diodes representative. https://www.diodes.com/quality/product-definitions/ Notes: Routers Power Tools Set-Top Box (STB) Power Supply Smart Speakers Network Adaptors 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain