AP64102QSP-13

AP64102Q AUTOMOTIVE-COMPLIANT, 40V, 1A SYNCHRONOUS BUCK WITH INTERNAL COMPENSATION Description Pin Assignments The AP64102Q is an automotive-compliant 1A, synchronous buck converter with a wide input voltage range of 3.8V to 40V. The device fully integrates a 150mΩ high-side power MOSFET and an 80mΩ lowside power MOSFET to provide high-efficiency step-down DC-DC conversion. (Top View) The AP64102Q device is easily used by minimizing the external component count due to its adoption of peak current mode control along with its integrated loop compensation network. BST 1 VIN 2 8 SW 7 GND EXPOSED PAD 9 The AP64102Q design is optimized for Electromagnetic Interference (EMI) reduction. The device has a proprietary gate driver scheme to resist switching node ringing without sacrificing MOSFET turn-on and turn-off times, which reduces high-frequency radiated EMI noise caused by MOSFET switching. The AP64102Q also features Frequency Spread Spectrum (FSS) with a switching frequency jitter of ±6%, which reduces EMI by not allowing emitted energy to stay in any one frequency for a significant period of time. EN 3 6 SS RT/CLK 4 5 FB SO-8EP The device is available in an SO-8EP package. Features Applications                         AEC-Q100 Qualified for Automotive Applications  Device Temperature Grade 1: -40°C to +125°C TA Range VIN: 3.8V to 40V Output Voltage (VOUT): 0.8V to VIN 1A Continuous Output Current 0.8V ± 1% Reference Voltage 25µA Low Quiescent Current (Pulse Frequency Modulation) Adjustable Switching Frequency: 100kHz to 2.2MHz External Clock Synchronization: 100kHz to 2.2MHz Adjustable Soft-Start Time Up to 88% Efficiency at 5mA Light Load Proprietary Gate Driver Design for Best EMI Reduction Frequency Spread Spectrum (FSS) to Reduce EMI Low-Dropout (LDO) Mode Precision Enable Threshold to Adjust UVLO Protection Circuitry  Undervoltage Lockout (UVLO)  Output Overvoltage Protection (OVP)  Cycle-by-Cycle Peak Current Limit  Thermal Shutdown Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) The AP64102Q is suitable for automotive applications requiring specific change control; this part is AEC-Q100 qualified, PPAP capable, and manufactured in IATF 16949 certified facilities. https://www.diodes.com/quality/product-definitions/ Notes: Automotive Power Systems Automotive Infotainment Automotive Instrument Clusters Automotive Telematics Automotive Lighting Control Advanced Driver Assistance Systems 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain