AP7175MP-13

NOT RECOMMENDED FOR NEW DESIGN NO ALTERNATE PART AP7175 3A ULTRA LOW DROPOUT LINEAR REGULATOR WITH ENABLE Description Pin Assignments (Top View) The AP7175 is a 3.0A ultra low-dropout (LDO) linear regulator that features an enable input and a power-good output. The enable input and power-good output allow users to configure power management solutions that can meet the sequencing requirements of FPGAs, DSPs, and other applications with different start-up and power-down requirements. The AP7175 features two supply inputs, for power conversion supply and control. With the separation of the control and the power input very low dropout voltages can be reached and power dissipation is reduced. GND 1 8 EN FB 2 7 PG VOUT 3 6 VCNTL VOUT 4 5 VIN SO-8EP (Top View) A precision reference and feedback control deliver 1.5% accuracy over load, line, and operating temperature ranges. GND 1 8 EN FB 2 7 PG VOUT 3 6 VCNTL VOUT 4 5 VIN MSOP-8EP The AP7175 is available in SO-8EP and MSOP-8EP package with an exposed PAD to reduce the junction to case resistance and extend the temperature range it can be used in. Features Applications  VIN Range: 1.2V to 3.65V VCNTL 3.0V to 5.5V   Adjustable output voltage Continuous Output Current IOUT = 3A   Fast transient response Power on reset monitoring on VCNTL and VIN     Internal Softstart Stable with Low ESR MLCC Capacitors Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Notes: = PAD (connected to VIN)  Notebook        PC Netbook Wireless Communication Server Motherboard Dongle Front Side Bus VTT (1.2V/3.3A) 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain