AP7366EA-18W5-7

AP7366EA 600mA, LOW QUIESCENT CURRENT FAST TRANSIENT LOW DROPOUT LINEAR REGULATOR Description Pin Assignments The DIODES™ AP7366EA is a 600mA, adjustable and fixed output voltage, low dropout linear regulator. This device includes pass element, error amplifier, band-gap, current limit and thermal shutdown circuitry. The device is turned on when EN pin is set to logic high level. (Top View ) IN 1 5 OUT EN 3 4 ADJ SOT25 (Fixed Output) SOT25 (ADJ Output) (Top View) (Top View) EN 1 6 NC EN 1 GND 2 5 NC GND 2 4 OUT U-DFN2020-6 (Fixed Output) IN 3 6 ADJ 5 NC 4 OUT U-DFN2020-6 (ADJ Output) Applications   600mA Low Dropout Regulator with EN Low IQ: 60µA    Wide Input Voltage Range: 2.2V to 6V Wide Adjustable Output: 0.8V to 5.0V Fixed Output Options: 1.0V, 1.2V, 1.5V, 1.8V, 2.0V, 2.5V, 2.8V, 3.0V, 3.3V, 3.6V, 3.9V High PSRR: 75dB at 1kHz Fast Start-up Time: 150µs Stable with Low ESR, 1µF Ceramic Output Capacitor Excellent Load/Line Transient Response Low Dropout: 300mV at 600mA Current Limit and Short Circuit Protection Thermal Shutdown Protection Ambient Temperature Range: -40°C to +85°C Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) For automotive applications requiring specific change control (i.e. parts qualified to AEC-Q100/101/104/200, PPAP capable, and manufactured in IATF 16949 certified facilities), please contact us or your local Diodes representative. https://www.diodes.com/quality/product-definitions/ Notes: 4 NC IN 3 The AP7366EA is available in SOT25 and U-DFN2020-6 packages. IN 1 GND 2 EN 3 This device is available with adjustable output from 0.8V to 5.0V, and fixed version with 1.0V, 1.2V, 1.5V, 1.8V, 2.0V, 2.5V, 2.8V, 3.0V, 3.3V, 3.6V and 3.9V outputs. Please contact your local sales office for other voltage options.            5 OUT GND 2 The characteristics of low dropout voltage and low quiescent current make it suitable for low power applications such as battery powered devices. The typical quiescent current is approximately 60μA. Built-in current-limit and thermal-shutdown functions prevent IC from damage in fault conditions. Features (Top View )     Servers and notebook computers Low and medium power applications FPGA and DSP cores or I/O powers Consumer electronics 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain