BSP75NQTA

BSP75NQ ADVANCE INFORMATION 60V SELF-PROTECTED LOW-SIDE IntelliFET MOSFET SWITCH Product Summary Features and Benefits                 Continuous Drain Source Voltage: VDS = 60V On-State Resistance: 500mΩ Max Nominal Load Current (VIN = 5V): 1.1A Min Nominal Load Current (VIN = 5V): 0.7A Clamping Energy: 550mJ Description The DIODES™ BSP75NQ is a self-protected low-side MOSFET. It features monolithic overtemperature, overcurrent, overvoltage (active clamp) and ESD protected logic level functionality. It is intended as a general purpose switch. Applications       Short Circuit Protection with Auto Restart Over Voltage Protection (Active Clamp) Thermal Shutdown with Auto Restart Over-Current Protection Input Protection (ESD) Load Dump Protection (Actively Protects Load) Logic Level Input High Continuous Current Rating Lead-Free Finish; RoHS Compliant (Note 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) The BSP75NQ is suitable for automotive applications requiring specific change control; this part is AEC-Q101 qualified, PPAP capable, and manufactured in IATF16949 certified facilities. https://www.diodes.com/quality/product-definitions/ Especially suited for loads with a high in-rush current such as lamps and motors All types of resistive, inductive and capacitive loads in switching applications μC compatible power switches for 12v and 24v DC applications Automotive rated Replaces electromechanical relays and discrete circuits Linear mode capability - the current-limiting protection circuitry is designed to de-activate at low VDS in order not to compromise Mechanical Data      Package: SOT223 Package Material: Molded Plastic, “Green” Molding Compound UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Matte Tin Finish e3 Weight: 0.112 grams (Approximate) the load current during normal operation. The maximum DC operating current is therefore determined by the thermal capability of the package/board combination, rather than by the protection circuitry. This does not compromise the product’s ability to self-protect at low VDS. SOT223 (Type DN) Top View Pin Out Top View Note: The tab is connected to the source pin and must be electrically isolated from the drain pin. Connection of significant copper to the drain pin is recommended for best thermal performance. Ordering Information (Note 4) Part Number Package Marking Reel Size (inches) Tape Width (mm) BSP75NQTA SOT223 (Type DN) BSP75N 7 12 Notes: Packing Qty. Carrier 1,000 Units Reel 1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain