NOT RECOMMENDED FOR NEW DESIGN CONTACT US
D1G - D7G
1.0A GLASS PASSIVATED RECTIFIER
Features and Benefits
Mechanical Data
Glass Passivated Die Construction
High Current Capability and Low Forward Voltage Drop
Surge Overload Rating to 30A Peak
Lead Free Finish, RoHS Compliant (Note 1)
Case: T1
Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Polarity: Cathode Band
Terminals: Finish – Tin. Solderable per MIL-STD-202, Method 208
Marking: Type Number
Weight: 0.13 grams (approximate)
Ordering Information (Note 2)
Device
D1G-T
D2G-T
D3G-T
D4G-T
D5G-T
D6G-T
D7G-T
Packaging
T-1
T-1
T-1
T-1
T-1
T-1
T-1
Shipping
5K/Tape & Reel, 13-inch
5K/Tape & Reel, 13-inch
5K/Tape & Reel, 13-inch
5K/Tape & Reel, 13-inch
5K/Tape & Reel, 13-inch
5K/Tape & Reel, 13-inch
5K/Tape & Reel, 13-inch
Maximum Ratings and Electrical Characteristics @TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current
(Note 3)
@ TA = 75C
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on rated load
Forward Voltage
@ IF = 1.0A
Peak Reverse Current
@ TA = 25C
at Rated DC Blocking Voltage
@ TA = 100C
Typical Reverse Recovery Time (Note 4)
Typical Total Capacitance (Note 5)
Typical Thermal Resistance Junction to Ambient
Operating and Storage Temperature Range
Notes:
Symbol
VRRM
VRWM
VR
VR(RMS)
D1G
D2G
D3G
D4G
D5G
D6G
D7G
Unit
50
100
200
400
600
800
1000
V
35
70
140
280
420
560
700
V
IO
1.0
A
IFSM
30
A
VFM
1.0
5.0
50
2.0
8.0
100
-65 to +150
V
IRM
trr
CT
RJA
TJ, TSTG
A
s
pF
C/W
C
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes
2. For packaging details, visit our website at http://www.diodes.com.
3. Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case.
4. Measured with IF = 0.5A, IR = 1A, Irr = 0.25A.
5. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
D1G – D7G
Document number: DS29001 Rev. 5 - 3
1 of 4
www.diodes.com
August 2022
© Diodes Incorporated
10
IF, INSTANTANEOUS FORWARD CURRENT (A)
IAV, AVERAGE FORWARD RECTIFIED CURRENT (A)
1.0
0.8
0.6
0.4
0.2
1.0
0.1
0
0.01
40
60
100
80
120
160
140
0.6
180
TA, AMBIENT TEMPERATURE (ºC)
Fig. 1 Forward Current Derating Curve
1.0
1.2
1.4
1.6
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
30
100
Tj = 25ºC
f = 1MHz
CT, TOTAL CAPACITANCE (pF)
IFSM, PEAK FORWARD SURGE CURRENT (A)
0.8
25
20
15
10
0
1.0
10
NUMBER OF CYCLES AT 60 Hz
Fig. 3 Max Non-Repetitive Peak
Forward Surge Current
100
10
1.0
1.0
10
VR, REVERSE VOLTAGE (V)
Fig. 4 Typical Total Capacitance
100
100
Tj = 100°C
10
1.0
Tj = 25°C
0.1
0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig. 5 Typical Reverse Characteristics
D1G – D7G
Document number: DS29001 Rev. 5 - 3
2 of 4
www.diodes.com
August 2022
© Diodes Incorporated
Package Outline Dimensions
Dim
A
B
C
D
D1G – D7G
Document number: DS29001 Rev. 5 - 3
3 of 4
www.diodes.com
T-1
Min
Max
25.40
2.60
3.20
0.53
0.64
2.20
2.60
All Dimensions in mm
August 2022
© Diodes Incorporated
IMPORTANT NOTICE
1.
DIODES INCORPORATED (Diodes) AND ITS SUBSIDIARIES MAKE NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH
REGARDS TO ANY INFORMATION CONTAINED IN THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
RIGHTS (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
2.
The Information contained herein is for informational purpose only and is provided only to illustrate the operation of Diodes’ products
described herein and application examples. Diodes does not assume any liability arising out of the application or use of this document or any
product described herein. This document is intended for skilled and technically trained engineering customers and users who design with Diodes’
products. Diodes’ products may be used to facilitate safety-related applications; however, in all instances customers and users are responsible for
(a) selecting the appropriate Diodes products for their applications, (b) evaluating the suitability of Diodes’ products for their intended applications,
(c) ensuring their applications, which incorporate Diodes’ products, comply the applicable legal and regulatory requirements as well as safety and
functional-safety related standards, and (d) ensuring they design with appropriate safeguards (including testing, validation, quality control
techniques, redundancy, malfunction prevention, and appropriate treatment for aging degradation) to minimize the risks associated with their
applications.
3.
Diodes assumes no liability for any application-related information, support, assistance or feedback that may be provided by Diodes
from time to time. Any customer or user of this document or products described herein will assume all risks and liabilities associated with such
use, and will hold Diodes and all companies whose products are represented herein or on Diodes’ websites, harmless against all damages and
liabilities.
4.
Products described herein may be covered by one or more United States, international or foreign patents and pending patent
applications. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks
and trademark applications. Diodes does not convey any license under any of its intellectual property rights or the rights of any third parties
(including third parties whose products and services may be described in this document or on Diodes’ website) under this document.
5.
Diodes’
products
are
provided
subject
to
Diodes’
Standard
Terms
and
Conditions
of
Sale
(https://www.diodes.com/about/company/terms-and-conditions/terms-and-conditions-of-sales/) or other applicable terms. This document does not
alter or expand the applicable warranties provided by Diodes. Diodes does not warrant or accept any liability whatsoever in respect of any
products purchased through unauthorized sales channel.
6.
Diodes’ products and technology may not be used for or incorporated into any products or systems whose manufacture, use or sale is
prohibited under any applicable laws and regulations. Should customers or users use Diodes’ products in contravention of any applicable laws or
regulations, or for any unintended or unauthorized application, customers and users will (a) be solely responsible for any damages, losses or
penalties arising in connection therewith or as a result thereof, and (b) indemnify and hold Diodes and its representatives and agents harmless
against any and all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim relating to any noncompliance with
the applicable laws and regulations, as well as any unintended or unauthorized application.
7.
While efforts have been made to ensure the information contained in this document is accurate, complete and current, it may contain
technical inaccuracies, omissions and typographical errors. Diodes does not warrant that information contained in this document is error-free and
Diodes is under no obligation to update or otherwise correct this information. Notwithstanding the foregoing, Diodes reserves the right to make
modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described
herein. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document
is the final and determinative format released by Diodes.
8.
Any unauthorized copying, modification, distribution, transmission, display or other use of this document (or any portion hereof) is
prohibited. Diodes assumes no responsibility for any losses incurred by the customers or users or any third parties arising from any such
unauthorized use.
9. This Notice may be periodically updated with the most recent version available at https://www.diodes.com/about/company/terms-andconditions/important-notice
DIODES is a trademark of Diodes Incorporated in the United States and other countries.
The Diodes logo is a registered trademark of Diodes Incorporated in the United States and other countries.
© 2022 Diodes Incorporated. All Rights Reserved.
www.diodes.com
D1G – D7G
Document number: DS29001 Rev. 5 - 3
4 of 4
www.diodes.com
August 2022
© Diodes Incorporated