Not Recommended for New Design
Alternative is BCP51 & BCP5116
DCP51/-16
PNP SURFACE MOUNT TRANSISTOR
Features
•
•
•
•
•
•
Epitaxial Planar Die Construction
Complementary NPN Type Available (DCP54)
Ideally Suited for Automated Assembly Processes
Ideal for Medium Power Switching or Amplification
Applications
Lead Free By Design/RoHS Compliant (Note 1)
"Green" Device (Note 2)
3
2
1
4
SOT-223
Mechanical Data
•
•
•
•
•
•
•
•
COLLECTOR
Case: SOT-223
Case Material: Molded Plastic, “Green” Molding Compound. UL
Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020C
Terminals: Finish − Matte Tin annealed over Copper leadframe
(Lead Free Plating). Solderable per MIL-STD-202, Method 208
Terminal Connections: See Diagram
Marking & Type Code Information: See Page 3
Ordering Information: See Page 3
Weight: 0.115 grams (approximate)
Maximum Ratings
2,4
3 E
2 C
C 4
1
BASE
1 B
3
EMITTER
TOP VIEW
Schematic and Pin Configuration
@TA = 25°C unless otherwise specified
Characteristic
Collector-Base Voltage
Collector-Emitter Voltage
Emitter-Base Voltage
Peak Pulse Current
Continuous Collector Current
Symbol
VCBO
VCEO
VEBO
ICM
IC
Value
-45
-45
-5
-1.5
-1
Unit
V
V
V
A
A
Symbol
Pd
Tj,TSTG
RθJA
Value
1 (Note 3)
-55 to +150
125
Thermal Characteristics
Characteristic
Power Dissipation @ TA = 25°C (Note 3)
Operating and Storage Temperature Range
Thermal Resistance Junction to Ambient Air @ TA = 25°C (Note 3)
Electrical Characteristics
@TA = 25°C unless otherwise specified
Characteristic
OFF CHARACTERISTICS (Note 4)
Collector-Base Breakdown Voltage
Collector-Emitter Breakdown Voltage
Emitter-Base Breakdown Voltage
Symbol
Min
Typ
Max
Unit
Conditions
V(BR)CBO
V(BR)CEO
V(BR)EBO
-45
-45
-5
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
-100
-10
-10
V
V
V
nA
μA
μA
IC = -100μA, IE = 0A
IC = -10mA, IB = 0A
IE = -10μA, IC = 0A
VCB = -30V, IE = 0A
VCB = - 30V, IE = 0A, TA = 150°C
VEB = -5V, IC = 0A
⎯
⎯
40
25
100
⎯
⎯
V
V
⎯
-0.5
-1.0
250
⎯
250
IC = -500mA, IB = -50mA
IC = -500mA, VCE = -2V
IC = -150mA, VCE = -2V
IC = -500mA, VCE = -2V
IC = -150mA, VCE = -2V
200
⎯
Collector Cut-Off Current
ICBO
Emitter Cut-Off Current
ON CHARACTERISTICS (Note 4)
Collector-Emitter Saturation Voltage
Base-Emitter Turn-On Voltage
IEBO
DC Current Gain
VCE(SAT)
VBE(ON)
hFE
DCP51-16
SMALL SIGNAL CHARACTERISTICS
Transition Frequency
Note:
Unit
W
°C
°C/W
fT
⎯
⎯
⎯
MHz
IC = -50mA, VCE = -5V,
f = 100MHz
1. No purposefully added lead.
2. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php.
3. Device mounted on FR-4 PCB pad layout as shown on page 4 or on Diodes, Inc. suggested pad layout document AP02001, which can be found on
our website at http://www.diodes.com/datasheets/ap02001.pdf.
4. Measured under pulsed conditions. Pulse width = 300μs. Duty cycle ≤2%
DCP51/-16
Document number: DS31196 Rev. 3 - 3
1 of 4
www.diodes.com
June 2011
© Diodes Incorporated
Not Recommended for New Design
Alternative is BCP51 & BCP5116
1.2
PD, POWER DISSIPATION (W)
1.0
0.8
0.6
0.4
0.2
0
25
50
75
100
125
150
175
TA, AMBIENT TEMPERATURE (°C)
Fig. 1 Power Dissipation vs. Ambient Temperature (Note 3)
0
DCP51/-16
Document number: DS31196 Rev. 3 - 3
2 of 4
www.diodes.com
June 2011
© Diodes Incorporated
Not Recommended for New Design
Alternative is BCP51 & BCP5116
160
140
CAPACITANCE(pF)
120
100
80
60
40
20
0
0
10
20
30
40
VR, REVERSE VOLTAGE (V)
Fig. 7 Typical Capacitance Characteristics
Ordering Information
(Note 5)
Case
SOT-223
SOT-223
Part Number
DCP51-13
DCP51-16-13
Notes:
Packaging
2500 / Tape & Reel
2500 / Tape & Reel
5. For packaging details, please visit our website at http://www.diodes.com/datasheets/ap02007.pdf.
Marking Information
(Top View)
YWW
XXX
= Manufacturer’s code marking
XXX = Product type marking code Ex: P14 = DCP51
P14-16 = DCP51-16
YWW = Date code marking
Y = Last digit of year ex: 7 = 2007
WW = Week code 01 - 52
Package Outline Dimensions
SOT-223
Dim
Min
Max
Typ
A
1.55
1.65
1.60
A1
0.010
0.15
0.05
b1
2.90
3.10
3.00
b2
0.60
0.80
0.70
C
0.20
0.30
0.25
D
6.45
6.55
6.50
E
3.45
3.55
3.50
E1
6.90
7.10
7.00
e
—
—
4.60
e1
—
—
2.30
L
0.85
1.05
0.95
Q
0.84
0.94
0.89
All Dimensions in mm
DCP51/-16
Document number: DS31196 Rev. 3 - 3
3 of 4
www.diodes.com
June 2011
© Diodes Incorporated
Not Recommended for New Design
Alternative is BCP51 & BCP5116
Suggested Pad Layout: (Based on IPC-SM-782)
(Unit:mm)
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2011, Diodes Incorporated
www.diodes.com
DCP51/-16
Document number: DS31196 Rev. 3 - 3
4 of 4
www.diodes.com
June 2011
© Diodes Incorporated
