DGD0215WT-7

DGD0215/0216 1.9A HIGH SPEED SINGLE GATE DRIVER Description Features The DGD0215 and DGD0216 high speed / low side MOSFET and IGBT drivers are capable of driving 1.9A of peak current. The DGD0215 and DGD0216 logic inputs are compatible with standard TTL and CMOS levels (down to 3.3V) to interface easily with MCUs. Fast and well matched propagation delays allow high speed operation, enabling a smaller and more compact power switching design using smaller associated components.            The DGD0215 and DGD0216 are highly resistant to noise, and are able to withstand up to 5V positive or negative on the ground pin without damage. The devices can also withstand 500mA of reverse current forced back into the outputs without damage or logic change. The DGD0215 provides an inverted output and the DGD0216 provides a non-inverting ouput. The DGD0215 and DGD0216 are offered in TSOT25 package and the operating temperature extends from -40°C to +125°C. Applications     Efficient Low Cost Solution for Driving MOSFETs and IGBTs Wide Supply Voltage Operating Range: 4.5V to 18V 1.9A Source / 1.8A Sink Output Current Capability Inverting and Non-Inverting Input Configurations Fast Propagation Delay (35ns typ) Fast Rise and Fall Times (15ns typ) Logic Input (IN and IN*) 3.3V Capability Extended Temperature Range: -40°C to +125°C Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) For automotive applications requiring specific change control (i.e. parts qualified to AEC-Q100/101/200, PPAP capable, and manufactured in IATF 16949 certified facilities), please contact us or your local Diodes representative. https://www.diodes.com/quality/product-definitions/ Mechanical Data DC-DC Converters Line Drivers Motor Controls Switch Mode Power Supplies      Package: TSOT25 (Type TH) Package Material: Molded Plastic. “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 3 per J-STD-020 Terminals: Finish – Matte Tin Plated Leads. Solderable per MILSTD-202, Method 208 Weight: 0.012 grams (Approximate) Typical Configuration TSOT25 Ordering Information (Note 4) Notes: Part number Marking Reel Size (inches) Tape Width (mm) DGD0215WT-7 DGD0216WT-7 D0215 D0216 7 7 8 8 Qty. 3,000 3,000 Packing Carrier Reel Reel 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain